Hello, I have a task when ever i configure e0/1 under eigrp the router
crashes.
The flash led stays blinking. Dont know that to do!!!!! almost a day lost
trying to overcome this.!!!!
Any idea, this have never happened before with EIGRP in this router. dont
have memory to go to 12.4!!!!!!
Advice is welcome.
c2600-ik9o3s3-mz.123-26.bin
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(26), RELEASE
SOFTWARE (fc2)
cisco 2611 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of
memory.
Processor board ID JAD050526YT (1173690101) M860 processor: part number 0,
mask 49 Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Thanks
Santiago E
Blogs and organic groups at http://www.ccie.net
Received on Sat May 16 2009 - 18:04:20 ART
This archive was generated by hypermail 2.2.0 : Mon Jun 01 2009 - 07:04:43 ART