Re: Dampening

Hello,

I had to look this up .. good question, thanks.

I think you partly answered the question ... in a round about way. Here is
the guide (watch the ugly word wrap):
http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_pi1.html#wp1011620

Making the interface become suppressed is not hard ... and the penalty
begins to decay. The answer is in the configs, although when I was testing
this I was only able to get it to be exactly 30 seconds in one of my tests;
apart from this the time was always a few seconds below.

I used the debug command to verify the configs and times.

- debug dampening interface -

 I just could not get it to be exactly 30 seconds.

Team - would this be an issue? HTH,

Andrew Lee Lissitz

On Sat, May 16, 2009 at 2:17 PM, Antonio Gonzales Chaves <
ccieantony_at_gmail.com> wrote:

> Hi All,
> I'm stuck with a dampening issue. It ask me to dump a router
> interface if it flapped 3 times in a 30 second period. I know that every
> flap penalized the interface with 1000. If I configure the suppress
> threshold in 2001, with 3 flaps the interface is out. The question is, how
> can I made the penalty reset after 30 seconds from the first flap?
>
>
> Thanks in advance,
> Antony.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Andrew Lee Lissitz
all.from.nj_at_gmail.com
Blogs and organic groups at http://www.ccie.net