Re: %BGP-3-NOTIFICATION (unsupported/disjoint capability)

Dheven,

Peers need to be configured under the same families. If this is a CE-PE
connection, use the IPv4 VRF on the PE (to CE). VPNv4 is an address family
type, it does not itself distinguish the type of router it is. A router that
has VPNv4 peers configured, may also have IPv4 and IPv4 VRF peers.

Bryan Bartik
CCIE #23707 (R&S), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com

On Mon, May 11, 2009 at 12:07 PM, Dheven <dheven_at_gmail.com> wrote:

> Hi Bryan
>
> I have tested
>
> IPV4 to IPV4 = works
> IPV4 address-family vrf 123 to IPV4 = works
> VPNV4 to IPV4 = not working (unsupported/disjoint capability) error
>
> Thanx
>
> D
>
>
>
> On Mon, May 11, 2009 at 8:03 PM, Dheven <dheven_at_gmail.com> wrote:
>
>> Hi Bryan,
>>
>> My router R1 VPNV4 router needs to form a BGP neighbor with my BB2 router
>> which is a IPV4 router.
>>
>> can this be done.
>>
>>
>> Here is my configs:
>>
>> R1:
>>
>> router bgp 100
>> no bgp default ipv4-unicast
>> no bgp default route-target filter
>> neighbor 172.10.0.254 remote-as 254 (BB2 eth0 int)
>> neighbor 172.10.0.254 update-source loopback 0
>> neighbor 172.10.0.254 ebgp-mu
>>
>> address-family vpnv4
>> neighbor 172.10.0.254 activate
>> neighbor 172.10.0.254 send-community ext
>> neighbor 172.10.0.254 next-hop-unchanged
>>
>> BB2:
>>
>> router bgp 254
>> neighbor 10.10.1.1 remote-as 100 (R1 Loop0)
>> neighbor 10.10.1.1 ebgp-mu
>> network 192.168.1.0 mask 255.255.255.0
>>
>>
>> D
>>
>>
>> On Mon, May 11, 2009 at 7:47 PM, Bryan Bartik <bbartik_at_ipexpert.com>wrote:
>>
>>> Dheven,
>>>
>>> What are you trying to accomplish? Your VPNv4 neighbor needs to peer with
>>> another VPNv4 router. Both sides should be activated under the VPNv4 address
>>> family.
>>>
>>> Bryan Bartik
>>> CCIE #23707 (R&S), CCNP
>>> Sr. Support Engineer - IPexpert, Inc.
>>> URL: http://www.IPexpert.com
>>>
>>> On Mon, May 11, 2009 at 11:37 AM, Dheven <dheven_at_gmail.com> wrote:
>>>
>>>> Hi GS,
>>>>
>>>> I have created a BGP address family vpnv4 neighbor with an IPV4 router
>>>> and i
>>>> am getting the above message.
>>>>
>>>> any assistance how to bring up my neighbors will be greatly appreciated.
>>>>
>>>> I have tried from IPV4 to IPV4 and it works but the from VPNV4 to IPV4
>>>>
>>>> Regards
>>>>
>>>> D
>>>>
>>>> --
>>>> Always forgive your enemies - Nothing annoys them so much.
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>>
>>>
>>
>>
>> --
>> Always forgive your enemies - Nothing annoys them so much.
>>
>>
>>
>
>
> --
> Always forgive your enemies - Nothing annoys them so much.
>
>
>

--
Blogs and organic groups at http://www.ccie.net