RE: Voice Gateway Issue

Is any way we can define 15 channel on the Voice serial interface , mean when
ever user make a call in coming or out going its only use Top 15 channels .?
The reason why i am asking I have only 16 -Channel PVDM .which only allow me
15 calls in and out .. the problem when the in coming calls hits top 15
channels its worked fine ,,, but when its hits above 15 channel like 20 or 21
the incoming calls started drops . please advice ?

thanks for help ...

Sameer

> From: rwest_at_zyedge.com
> To: i_sameer_at_hotmail.com; farrukhharoon_at_gmail.com
> CC: ccielab_at_groupstudy.com
> Date: Thu, 30 Apr 2009 09:05:50 -0400
> Subject: RE: Voice Gateway Issue
>
> You got it.
>
> Cause i = 0x8081 - Unallocated/unassigned number
>
> -ryan
>
> From: sameer inam [mailto:i_sameer_at_hotmail.com]
> Sent: Thursday, April 30, 2009 9:05 AM
> To: Ryan West; farrukhharoon_at_gmail.com
> Cc: ccielab_at_groupstudy.com
> Subject: RE: Voice Gateway Issue
>
>
> please see below incoming call traffic .. I think it some thing to do with
> call manager ...
>
>
> 000164: Apr 30 13:00:45.164: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8 callref
=
> 0
> x006B
> Sending Complete
> Bearer Capability i = 0x8090A3
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA9838C
> Exclusive, Channel 12
> Progress Ind i = 0x8583 - Origination address is non-ISDN
> Calling Party Number i = 0x0081, '043137230'
> Plan:Unknown, Type:Unknown
> Called Party Number i = 0x81, '511'
> Plan:ISDN, Type:Unknown
> 000165: Apr 30 13:00:45.180: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8
> callref
> = 0x806B
> Channel ID i = 0xA9838C
> Exclusive, Channel 12
> 000166: Apr 30 13:00:45.184: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd = 8
> callre
> f = 0x806B
> Cause i = 0x8081 - Unallocated/unassigned number
> 000167: Apr 30 13:00:45.244: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8
callref
> =
> 0x006B
> 000168: Apr 30 13:00:45.248: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd = 8
> call
> ref = 0x806B
> 000169: Apr 30 13:01:03.224: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8 callref
=
> 0
> x006C
> Sending Complete
> Bearer Capability i = 0x8090A3
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA9838D
> Exclusive, Channel 13
> Progress Ind i = 0x8583 - Origination address is non-ISDN
> Calling Party Number i = 0x0081, '043137230'
> Plan:Unknown, Type:Unknown
> Called Party Number i = 0x81, '511'
> Plan:ISDN, Type:Unknown
> 000170: Apr 30 13:01:03.240: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8
> callref
> = 0x806C
> Channel ID i = 0xA9838D
> Exclusive, Channel 13
> 000171: Apr 30 13:01:03.244: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd = 8
> callre
> f = 0x806C
> Cause i = 0x8081 - Unallocated/unassigned number
> 000172: Apr 30 13:01:03.304: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8
callref
> =
> 0x006C
> 000173: Apr 30 13:01:03.308: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd = 8
> call
> ref = 0x806C
> 000174: Apr 30 13:01:07.888: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8 callref
=
> 0
> x006D
> Sending Complete
> Bearer Capability i = 0x8090A3
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA9838E
> Exclusive, Channel 14
> Progress Ind i = 0x8583 - Origination address is non-ISDN
> Calling Party Number i = 0x0081, '043137229'
> Plan:Unknown, Type:Unknown
> Called Party Number i = 0x81, '511'
> Plan:ISDN, Type:Unknown
> 000175: Apr 30 13:01:07.904: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8
> callref
> = 0x806D
> Channel ID i = 0xA9838E
> Exclusive, Channel 14
> 000176: Apr 30 13:01:07.908: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd = 8
> callre
> f = 0x806D
> Cause i = 0x8081 - Unallocated/unassigned number
> 000177: Apr 30 13:01:07.968: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8
callref
> =
> 0x006D
> 000178: Apr 30 13:01:07.972: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd = 8
> call
> ref = 0x806D
>
>
> ________________________________
> From: rwest_at_zyedge.com
> To: i_sameer_at_hotmail.com; farrukhharoon_at_gmail.com
> CC: ccielab_at_groupstudy.com
> Date: Thu, 30 Apr 2009 09:02:04 -0400
> Subject: RE: Voice Gateway Issue
> Can you post your isdn debug and verify that you have
> MULTIPLE_FRAME_ESTABLISHED on your PRI. I don't work on much E1's, but I
> think the output should still be the same.
>
> -ryan
>
> From: sameer inam [mailto:i_sameer_at_hotmail.com]
> Sent: Thursday, April 30, 2009 8:58 AM
> To: Ryan West; farrukhharoon_at_gmail.com
> Cc: ccielab_at_groupstudy.com
> Subject: RE: Voice Gateway Issue
>
> No sir its not working I tried the below Dial peer but its not working .
>
>
>
>
>
> > From: rwest_at_zyedge.com
> > To: i_sameer_at_hotmail.com; farrukhharoon_at_gmail.com
> > CC: ccielab_at_groupstudy.com
> > Date: Thu, 30 Apr 2009 08:42:26 -0400
> > Subject: RE: Voice Gateway Issue
> >
> > Sameer,
> >
> > I assume when you do a 'show isdn stat' that you're in multi-frame
> established, if not get that worked out. If you can confirm that your ISDN
is
> good, then try the following:
> >
> > debug isdn q931
> >
> > Use that to verify that the telco is indeed sending you the number of
digits
> and format that you're expecting.
> >
> > debug voip ccapi inout
> >
> > Use that to show call path, translation, and dial-peer matching to see
where
> the call is getting disconnected.
> >
> > Your dial-peers seems a bit strange. You might want to try something like
> this:
> >
> > dial-peer voice 1 pots
> > description Inbound voice dial-peer
> > incoming called-number .
> > direct-inward-dial
> > port 1/0:15
> >
> > That dial-peer will land the call on your GW and take the received digits
> (called number) and look to match them against your destination-patterns.
If
> you go this route, I would remove the direct-inward-dial from your other
> dial-peers.
> >
> > -ryan
> >
> > -----Original Message-----
> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> sameer inam
> > Sent: Thursday, April 30, 2009 7:38 AM
> > To: farrukhharoon_at_gmail.com
> > Cc: ccielab_at_groupstudy.com
> > Subject: RE: Voice Gateway Issue
> >
> > controller E1 1/0
> > framing NO-CRC4
> > pri-group timeslots 1-16
> > description PRI_3816500 [6500-6599]
> >
> >
> >
> > ISDN 1/0:15 Slot is 1, Subslot is 1, Sub-unit is 0, Port is 15
> > Type of VoicePort is ISDN-VOICE
> > Operation State is DORMANT
> > Administrative State is UP
> > No Interface Down Failure
> > Description is not set
> > Noise Regeneration is enabled
> > Non Linear Processing is enabled
> > Non Linear Mute is disabled
> > Non Linear Threshold is -21 dB
> > Music On Hold Threshold is Set to -38 dBm
> > In Gain is Set to 0 dB
> > Out Attenuation is Set to 0 dB
> > Echo Cancellation is enabled
> > Echo Cancellation NLP mute is disabled
> > Echo Cancellation NLP threshold is -21 dB
> > Echo Cancel Coverage is set to 24 ms
> > Echo Cancel worst case ERL is set to 6 dB
> > Playout-delay Mode is set to adaptive
> > Playout-delay Nominal is set to 60 ms
> > Playout-delay Maximum is set to 250 ms
> > Playout-delay Minimum mode is set to default, value 40 ms
> > Playout-delay Fax is set to 300 ms
> > Connection Mode is normal
> > Connection Number is not set
> > Initial Time Out is set to 10 s
> > Interdigit Time Out is set to 10 s
> > Call Disconnect Time Out is set to 60 s
> > Ringing Time Out is set to 180 s
> > Wait Release Time Out is set to 30 s
> > Companding Type is A-law
> > Region Tone is set for US
> > Station name None, Station number None
> > Translation profile (Incoming):
> > Translation profile (Outgoing):
> > Voice class called number pool:
> >
> >
> > DS0 channel specific status info:
> > IN OUT
> > PORT CH SIG-TYPE OPER STATUS STATUS TIP RING
> > 1/0:15 01 isdn-voice dorm none none
> > 1/0:15 02 isdn-voice dorm none none
> > 1/0:15 03 isdn-voice dorm none none
> > 1/0:15 04 isdn-voice dorm none none
> > 1/0:15 05 isdn-voice dorm none none
> > 1/0:15 06 isdn-voice dorm none none
> > 1/0:15 07 isdn-voice dorm none none
> > 1/0:15 08 isdn-voice dorm none none
> > 1/0:15 09 isdn-voice dorm none none
> > 1/0:15 10 isdn-voice dorm none none
> > 1/0:15 11 isdn-voice dorm none none
> > 1/0:15 12 isdn-voice dorm none none
> > 1/0:15 13 isdn-voice dorm none none
> > 1/0:15 14 isdn-voice dorm none none
> > 1/0:15 15 isdn-voice dorm none none
> >
> >
> >
> >
> >
> >
> >
> >
> > > Date: Thu, 30 Apr 2009 13:01:39 +0300
> > > Subject: Re: Voice Gateway Issue
> > > From: farrukhharoon_at_gmail.com
> > > To: i_sameer_at_hotmail.com
> > > CC: ccielab_at_groupstudy.com
> > >
> > > Please post the controller configuration also, also the 'show voice
port
> > > summary' output
> > >
> > > which country are you based in, UAE?
> > >
> > > On Thu, Apr 30, 2009 at 12:54 PM, sameer inam <i_sameer_at_hotmail.com>
> wrote:
> > >
> > > > Guys,
> > > >
> > > > I need your help , I just installed the new voice gateway , they
> problem
> > is
> > > > I
> > > > cant recived any call from external .its gave us busy tone.dial out
no
> > > > issue
> > > > .could you please advice me what is the issue . Just FYI our Local
ISP
> > only
> > > > send last 3 digits of my DID number s.
> > > >
> > > >
> > > >
> > > > please se below the config ,
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > interface Serial1/0:15
> > > > no ip address
> > > > encapsulation hdlc
> > > > isdn switch-type primary-net5
> > > > isdn incoming-voice voice
> > > > !
> > > >
> > > > !
> > > > ip http server
> > > > no ip http secure-server
> > > > !
> > > > !
> > > > !
> > > > !
> > > > control-plane
> > > > !
> > > > !
> > > > !
> > > > voice-port 1/0:15
> > > > translate calling 1
> > > > echo-cancel coverage 24
> > > > !
> > > > !
> > > > !
> > > > !
> > > > dial-peer cor custom
> > > > !
> > > > !
> > > > !
> > > > dial-peer voice 1 pots
> > > > destination-pattern 9[2-9]......
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > forward-digits 7
> > > > !
> > > > dial-peer voice 2 pots
> > > > destination-pattern 9050.......
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 050
> > > > !
> > > > dial-peer voice 3 pots
> > > > destination-pattern 90[2-4].......
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 0
> > > > !
> > > > dial-peer voice 4 pots
> > > > destination-pattern 90[6-7].......
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 0
> > > > !
> > > > dial-peer voice 5 pots
> > > > destination-pattern 909.......
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 09
> > > > !
> > > > dial-peer voice 6 pots
> > > > destination-pattern 900T
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > >
> > > > dial-peer voice 8 pots
> > > > destination-pattern 1..
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > forward-digits all
> > > > !
> > > > dial-peer voice 10 pots
> > > > destination-pattern 91..
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 1
> > > > !
> > > > dial-peer voice 7 pots
> > > > destination-pattern 999
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > forward-digits all
> > > > !
> > > > dial-peer voice 9 pots
> > > > destination-pattern 9999
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 999
> > > > !
> > > > dial-peer voice 11 pots
> > > > incoming called-number 65..
> > > > direct-inward-dial
> > > > !
> > > > dial-peer voice 600 voip
> > > > preference 1
> > > > destination-pattern 65..
> > > > voice-class codec 10
> > > > session target ipv4:34.108.23.20
> > > > dtmf-relay h245-alphanumeric
> > > > fax rate disable
> > > > ip qos dscp cs5 media
> > > > ip qos dscp cs5 signaling
> > > > no vad
> > > > !
> > > > dial-peer voice 500 voip
> > > > preference 2
> > > > destination-pattern 65..
> > > > voice-class codec 10
> > > > session target ipv4:34.108.23.10
> > > > dtmf-relay h245-alphanumeric
> > > > fax rate disable
> > > > ip qos dscp cs5 media
> > > > ip qos dscp cs5 signaling
> > > > !
> > > > dial-peer voice 12 pots
> > > > destination-pattern 9800T
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 800
> > > > !
> > > > dial-peer voice 13 pots
> > > > destination-pattern 98000T
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 8000
> > > > !
> > > > dial-peer voice 14 pots
> > > > destination-pattern 9600T
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 600
> > > > !
> > > > dial-peer voice 15 pots
> > > > destination-pattern 9055.......
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 055
> > > > !
> > > > dial-peer voice 16 pots
> > > > destination-pattern 9056.......
> > > > progress_ind setup enable 3
> > > > progress_ind alert enable 8
> > > > progress_ind progress enable 8
> > > > direct-inward-dial
> > > > port 1/0:15
> > > > prefix 056
> > > >
> > > >
> > > >
> > > >
> > > > _________________________________________________________________
> > > > Show them the way! Add maps and directions to your party invites.
> > > > http://www.microsoft.com/windows/windowslive/products/events.aspx
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
Received on Sun May 03 2009 - 13:21:34 ART