RE: Voice Gateway Issue

could you please advice the command line ?

Thanks for help .

Sameer

> From: hoomanp_at_hotmail.com
> To: i_sameer_at_hotmail.com; rwest_at_zyedge.com; farrukhharoon_at_gmail.com
> CC: ccielab_at_groupstudy.com
> Subject: RE: Voice Gateway Issue
> Date: Mon, 4 May 2009 14:25:23 +0000
>
> Busy-out the 16-23 or (16-30) channels (B-channels thorough Interface
Serial
> config or through CAS config under the controller)
>
> > From: i_sameer_at_hotmail.com
> > To: rwest_at_zyedge.com; farrukhharoon_at_gmail.com
> > CC: ccielab_at_groupstudy.com
> > Subject: RE: Voice Gateway Issue
> > Date: Sun, 3 May 2009 13:21:34 +0000
> >
> > Is any way we can define 15 channel on the Voice serial interface , mean
> when
> > ever user make a call in coming or out going its only use Top 15 channels
> .?
> > The reason why i am asking I have only 16 -Channel PVDM .which only allow
> me
> > 15 calls in and out .. the problem when the in coming calls hits top 15
> > channels its worked fine ,,, but when its hits above 15 channel like 20
or
> 21
> > the incoming calls started drops . please advice ?
> >
> >
> >
> > thanks for help ...
> >
> >
> >
> > Sameer
> >
> >
> >
> >
> >
> > > From: rwest_at_zyedge.com
> > > To: i_sameer_at_hotmail.com; farrukhharoon_at_gmail.com
> > > CC: ccielab_at_groupstudy.com
> > > Date: Thu, 30 Apr 2009 09:05:50 -0400
> > > Subject: RE: Voice Gateway Issue
> > >
> > > You got it.
> > >
> > > Cause i = 0x8081 - Unallocated/unassigned number
> > >
> > > -ryan
> > >
> > > From: sameer inam [mailto:i_sameer_at_hotmail.com]
> > > Sent: Thursday, April 30, 2009 9:05 AM
> > > To: Ryan West; farrukhharoon_at_gmail.com
> > > Cc: ccielab_at_groupstudy.com
> > > Subject: RE: Voice Gateway Issue
> > >
> > >
> > > please see below incoming call traffic .. I think it some thing to do
> with
> > > call manager ...
> > >
> > >
> > > 000164: Apr 30 13:00:45.164: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8
> callref
> > =
> > > 0
> > > x006B
> > > Sending Complete
> > > Bearer Capability i = 0x8090A3
> > > Standard = CCITT
> > > Transfer Capability = Speech
> > > Transfer Mode = Circuit
> > > Transfer Rate = 64 kbit/s
> > > Channel ID i = 0xA9838C
> > > Exclusive, Channel 12
> > > Progress Ind i = 0x8583 - Origination address is non-ISDN
> > > Calling Party Number i = 0x0081, '043137230'
> > > Plan:Unknown, Type:Unknown
> > > Called Party Number i = 0x81, '511'
> > > Plan:ISDN, Type:Unknown
> > > 000165: Apr 30 13:00:45.180: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8
> > > callref
> > > = 0x806B
> > > Channel ID i = 0xA9838C
> > > Exclusive, Channel 12
> > > 000166: Apr 30 13:00:45.184: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd =
8
> > > callre
> > > f = 0x806B
> > > Cause i = 0x8081 - Unallocated/unassigned number
> > > 000167: Apr 30 13:00:45.244: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8
> > callref
> > > =
> > > 0x006B
> > > 000168: Apr 30 13:00:45.248: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd
=
> 8
> > > call
> > > ref = 0x806B
> > > 000169: Apr 30 13:01:03.224: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8
> callref
> > =
> > > 0
> > > x006C
> > > Sending Complete
> > > Bearer Capability i = 0x8090A3
> > > Standard = CCITT
> > > Transfer Capability = Speech
> > > Transfer Mode = Circuit
> > > Transfer Rate = 64 kbit/s
> > > Channel ID i = 0xA9838D
> > > Exclusive, Channel 13
> > > Progress Ind i = 0x8583 - Origination address is non-ISDN
> > > Calling Party Number i = 0x0081, '043137230'
> > > Plan:Unknown, Type:Unknown
> > > Called Party Number i = 0x81, '511'
> > > Plan:ISDN, Type:Unknown
> > > 000170: Apr 30 13:01:03.240: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8
> > > callref
> > > = 0x806C
> > > Channel ID i = 0xA9838D
> > > Exclusive, Channel 13
> > > 000171: Apr 30 13:01:03.244: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd =
8
> > > callre
> > > f = 0x806C
> > > Cause i = 0x8081 - Unallocated/unassigned number
> > > 000172: Apr 30 13:01:03.304: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8
> > callref
> > > =
> > > 0x006C
> > > 000173: Apr 30 13:01:03.308: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd
=
> 8
> > > call
> > > ref = 0x806C
> > > 000174: Apr 30 13:01:07.888: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8
> callref
> > =
> > > 0
> > > x006D
> > > Sending Complete
> > > Bearer Capability i = 0x8090A3
> > > Standard = CCITT
> > > Transfer Capability = Speech
> > > Transfer Mode = Circuit
> > > Transfer Rate = 64 kbit/s
> > > Channel ID i = 0xA9838E
> > > Exclusive, Channel 14
> > > Progress Ind i = 0x8583 - Origination address is non-ISDN
> > > Calling Party Number i = 0x0081, '043137229'
> > > Plan:Unknown, Type:Unknown
> > > Called Party Number i = 0x81, '511'
> > > Plan:ISDN, Type:Unknown
> > > 000175: Apr 30 13:01:07.904: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8
> > > callref
> > > = 0x806D
> > > Channel ID i = 0xA9838E
> > > Exclusive, Channel 14
> > > 000176: Apr 30 13:01:07.908: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd =
8
> > > callre
> > > f = 0x806D
> > > Cause i = 0x8081 - Unallocated/unassigned number
> > > 000177: Apr 30 13:01:07.968: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8
> > callref
> > > =
> > > 0x006D
> > > 000178: Apr 30 13:01:07.972: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd
=
> 8
> > > call
> > > ref = 0x806D
> > >
> > >
> > > ________________________________
> > > From: rwest_at_zyedge.com
> > > To: i_sameer_at_hotmail.com; farrukhharoon_at_gmail.com
> > > CC: ccielab_at_groupstudy.com
> > > Date: Thu, 30 Apr 2009 09:02:04 -0400
> > > Subject: RE: Voice Gateway Issue
> > > Can you post your isdn debug and verify that you have
> > > MULTIPLE_FRAME_ESTABLISHED on your PRI. I don't work on much E1's, but
I
> > > think the output should still be the same.
> > >
> > > -ryan
> > >
> > > From: sameer inam [mailto:i_sameer_at_hotmail.com]
> > > Sent: Thursday, April 30, 2009 8:58 AM
> > > To: Ryan West; farrukhharoon_at_gmail.com
> > > Cc: ccielab_at_groupstudy.com
> > > Subject: RE: Voice Gateway Issue
> > >
> > > No sir its not working I tried the below Dial peer but its not working
.
> > >
> > >
> > >
> > >
> > >
> > > > From: rwest_at_zyedge.com
> > > > To: i_sameer_at_hotmail.com; farrukhharoon_at_gmail.com
> > > > CC: ccielab_at_groupstudy.com
> > > > Date: Thu, 30 Apr 2009 08:42:26 -0400
> > > > Subject: RE: Voice Gateway Issue
> > > >
> > > > Sameer,
> > > >
> > > > I assume when you do a 'show isdn stat' that you're in multi-frame
> > > established, if not get that worked out. If you can confirm that your
> ISDN
> > is
> > > good, then try the following:
> > > >
> > > > debug isdn q931
> > > >
> > > > Use that to verify that the telco is indeed sending you the number of
> > digits
> > > and format that you're expecting.
> > > >
> > > > debug voip ccapi inout
> > > >
> > > > Use that to show call path, translation, and dial-peer matching to
see
> > where
> > > the call is getting disconnected.
> > > >
> > > > Your dial-peers seems a bit strange. You might want to try something
> like
> > > this:
> > > >
> > > > dial-peer voice 1 pots
> > > > description Inbound voice dial-peer
> > > > incoming called-number .
> > > > direct-inward-dial
> > > > port 1/0:15
> > > >
> > > > That dial-peer will land the call on your GW and take the received
> digits
> > > (called number) and look to match them against your
destination-patterns.
> > If
> > > you go this route, I would remove the direct-inward-dial from your
other
> > > dial-peers.
> > > >
> > > > -ryan
> > > >
> > > > -----Original Message-----
> > > > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
Of
> > > sameer inam
> > > > Sent: Thursday, April 30, 2009 7:38 AM
> > > > To: farrukhharoon_at_gmail.com
> > > > Cc: ccielab_at_groupstudy.com
> > > > Subject: RE: Voice Gateway Issue
> > > >
> > > > controller E1 1/0
> > > > framing NO-CRC4
> > > > pri-group timeslots 1-16
> > > > description PRI_3816500 [6500-6599]
> > > >
> > > >
> > > >
> > > > ISDN 1/0:15 Slot is 1, Subslot is 1, Sub-unit is 0, Port is 15
> > > > Type of VoicePort is ISDN-VOICE
> > > > Operation State is DORMANT
> > > > Administrative State is UP
> > > > No Interface Down Failure
> > > > Description is not set
> > > > Noise Regeneration is enabled
> > > > Non Linear Processing is enabled
> > > > Non Linear Mute is disabled
> > > > Non Linear Threshold is -21 dB
> > > > Music On Hold Threshold is Set to -38 dBm
> > > > In Gain is Set to 0 dB
> > > > Out Attenuation is Set to 0 dB
> > > > Echo Cancellation is enabled
> > > > Echo Cancellation NLP mute is disabled
> > > > Echo Cancellation NLP threshold is -21 dB
> > > > Echo Cancel Coverage is set to 24 ms
> > > > Echo Cancel worst case ERL is set to 6 dB
> > > > Playout-delay Mode is set to adaptive
> > > > Playout-delay Nominal is set to 60 ms
> > > > Playout-delay Maximum is set to 250 ms
> > > > Playout-delay Minimum mode is set to default, value 40 ms
> > > > Playout-delay Fax is set to 300 ms
> > > > Connection Mode is normal
> > > > Connection Number is not set
> > > > Initial Time Out is set to 10 s
> > > > Interdigit Time Out is set to 10 s
> > > > Call Disconnect Time Out is set to 60 s
> > > > Ringing Time Out is set to 180 s
> > > > Wait Release Time Out is set to 30 s
> > > > Companding Type is A-law
> > > > Region Tone is set for US
> > > > Station name None, Station number None
> > > > Translation profile (Incoming):
> > > > Translation profile (Outgoing):
> > > > Voice class called number pool:
> > > >
> > > >
> > > > DS0 channel specific status info:
> > > > IN OUT
> > > > PORT CH SIG-TYPE OPER STATUS STATUS TIP RING
> > > > 1/0:15 01 isdn-voice dorm none none
> > > > 1/0:15 02 isdn-voice dorm none none
> > > > 1/0:15 03 isdn-voice dorm none none
> > > > 1/0:15 04 isdn-voice dorm none none
> > > > 1/0:15 05 isdn-voice dorm none none
> > > > 1/0:15 06 isdn-voice dorm none none
> > > > 1/0:15 07 isdn-voice dorm none none
> > > > 1/0:15 08 isdn-voice dorm none none
> > > > 1/0:15 09 isdn-voice dorm none none
> > > > 1/0:15 10 isdn-voice dorm none none
> > > > 1/0:15 11 isdn-voice dorm none none
> > > > 1/0:15 12 isdn-voice dorm none none
> > > > 1/0:15 13 isdn-voice dorm none none
> > > > 1/0:15 14 isdn-voice dorm none none
> > > > 1/0:15 15 isdn-voice dorm none none
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > Date: Thu, 30 Apr 2009 13:01:39 +0300
> > > > > Subject: Re: Voice Gateway Issue
> > > > > From: farrukhharoon_at_gmail.com
> > > > > To: i_sameer_at_hotmail.com
> > > > > CC: ccielab_at_groupstudy.com
> > > > >
> > > > > Please post the controller configuration also, also the 'show voice
> > port
> > > > > summary' output
> > > > >
> > > > > which country are you based in, UAE?
> > > > >
> > > > > On Thu, Apr 30, 2009 at 12:54 PM, sameer inam
<i_sameer_at_hotmail.com>
> > > wrote:
> > > > >
> > > > > > Guys,
> > > > > >
> > > > > > I need your help , I just installed the new voice gateway , they
> > > problem
> > > > is
> > > > > > I
> > > > > > cant recived any call from external .its gave us busy tone.dial
out
> > no
> > > > > > issue
> > > > > > .could you please advice me what is the issue . Just FYI our
Local
> > ISP
> > > > only
> > > > > > send last 3 digits of my DID number s.
> > > > > >
> > > > > >
> > > > > >
> > > > > > please se below the config ,
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > interface Serial1/0:15
> > > > > > no ip address
> > > > > > encapsulation hdlc
> > > > > > isdn switch-type primary-net5
> > > > > > isdn incoming-voice voice
> > > > > > !
> > > > > >
> > > > > > !
> > > > > > ip http server
> > > > > > no ip http secure-server
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > control-plane
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > voice-port 1/0:15
> > > > > > translate calling 1
> > > > > > echo-cancel coverage 24
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > dial-peer cor custom
> > > > > > !
> > > > > > !
> > > > > > !
> > > > > > dial-peer voice 1 pots
> > > > > > destination-pattern 9[2-9]......
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > forward-digits 7
> > > > > > !
> > > > > > dial-peer voice 2 pots
> > > > > > destination-pattern 9050.......
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 050
> > > > > > !
> > > > > > dial-peer voice 3 pots
> > > > > > destination-pattern 90[2-4].......
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 0
> > > > > > !
> > > > > > dial-peer voice 4 pots
> > > > > > destination-pattern 90[6-7].......
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 0
> > > > > > !
> > > > > > dial-peer voice 5 pots
> > > > > > destination-pattern 909.......
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 09
> > > > > > !
> > > > > > dial-peer voice 6 pots
> > > > > > destination-pattern 900T
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > >
> > > > > > dial-peer voice 8 pots
> > > > > > destination-pattern 1..
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > forward-digits all
> > > > > > !
> > > > > > dial-peer voice 10 pots
> > > > > > destination-pattern 91..
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 1
> > > > > > !
> > > > > > dial-peer voice 7 pots
> > > > > > destination-pattern 999
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > forward-digits all
> > > > > > !
> > > > > > dial-peer voice 9 pots
> > > > > > destination-pattern 9999
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 999
> > > > > > !
> > > > > > dial-peer voice 11 pots
> > > > > > incoming called-number 65..
> > > > > > direct-inward-dial
> > > > > > !
> > > > > > dial-peer voice 600 voip
> > > > > > preference 1
> > > > > > destination-pattern 65..
> > > > > > voice-class codec 10
> > > > > > session target ipv4:34.108.23.20
> > > > > > dtmf-relay h245-alphanumeric
> > > > > > fax rate disable
> > > > > > ip qos dscp cs5 media
> > > > > > ip qos dscp cs5 signaling
> > > > > > no vad
> > > > > > !
> > > > > > dial-peer voice 500 voip
> > > > > > preference 2
> > > > > > destination-pattern 65..
> > > > > > voice-class codec 10
> > > > > > session target ipv4:34.108.23.10
> > > > > > dtmf-relay h245-alphanumeric
> > > > > > fax rate disable
> > > > > > ip qos dscp cs5 media
> > > > > > ip qos dscp cs5 signaling
> > > > > > !
> > > > > > dial-peer voice 12 pots
> > > > > > destination-pattern 9800T
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 800
> > > > > > !
> > > > > > dial-peer voice 13 pots
> > > > > > destination-pattern 98000T
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 8000
> > > > > > !
> > > > > > dial-peer voice 14 pots
> > > > > > destination-pattern 9600T
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 600
> > > > > > !
> > > > > > dial-peer voice 15 pots
> > > > > > destination-pattern 9055.......
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 055
> > > > > > !
> > > > > > dial-peer voice 16 pots
> > > > > > destination-pattern 9056.......
> > > > > > progress_ind setup enable 3
> > > > > > progress_ind alert enable 8
> > > > > > progress_ind progress enable 8
> > > > > > direct-inward-dial
> > > > > > port 1/0:15
> > > > > > prefix 056
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > _________________________________________________________________
> > > > > > Show them the way! Add maps and directions to your party invites.
> > > > > > http://www.microsoft.com/windows/windowslive/products/events.aspx
> > > > > >
> > > > > >
> > > > > > Blogs and organic groups at http://www.ccie.net
> > > > > >
> > > > > >
> > _______________________________________________________________________
> > > > > > Subscription information may be found at:
> > > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > > > > Blogs and organic groups at http://www.ccie.net
> > > > >
> > > > >
> _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > > _________________________________________________________________
> > > > Show them the way! Add maps and directions to your party invites.
> > > > http://www.microsoft.com/windows/windowslive/products/events.aspx
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
Received on Tue May 05 2009 - 05:07:25 ART