Re: Unable to Write-Memory in 4006 Cat OS

let us know dude...

-frog

2009/4/27 WW)W WWWW W <eshedalonie_at_gmail.com>

> Darby,
>
> It Says to you
> File bootflash:switch.cfg can not be opened (file not found)
>
> When you Do -> copy flash config
>
> It asks you to put the file in bootflash:
> and then it says the name of the file.
>
> so I've named it as current.cfg
>
> When I did dir
>
> I Saw the file in bootflash:current.cfg
>
> anyway,
>
> the config-register 0x2 Looks good
>
>
http://www.cisco.com/en/US/docs/routers/access/4000/hardware/installation/gui
>
de/vconfig.html<http://www.cisco.com/en/US/docs/routers/access/4000/hardware/
installation/gui%0Ade/vconfig.html>
>
> I Will try that, Thanks Radioactive Frog.
>
>
> On 4/26/09, Darby Weaver <ccie.weaver_at_gmail.com> wrote:
> >
> > It's legacy.
> >
> > When you type a command - it is committed.
> >
> > You have two commands that rock:
> >
> > sh config - and save it out to text. - The commands that are manually
> > entered and non-default.
> >
> > sh config all - all the commands - both default and the ones manually
> > entered. Careful if you are a tree-hugger...
> >
> > 4006-1> (enable) sh boot
> > BOOT variable = bootflash:cat4000-k8.8-4-7-GLX.bin,1;
> > CONFIG_FILE variable = bootflash:switch.cfg
> > Configuration register is 0x2102
> > ignore-config: disabled
> > auto-config: non-recurring
> > console baud: 9600
> > boot: image specified by the boot system commands
> >
> >
> > 4006-1> (enable) copy bootflash:switch.cfg tftp
> > File bootflash:switch.cfg does not exist
> > Failed to copy from bootflash:switch.cfg to tftp
> >
> > -4006-1> (enable) sh file switch.cfg
> > error = -9
> > File bootflash:switch.cfg can not be opened (file not found)
> > -4006-1> (enable) sh file bootflash:switch.cfg
> > error = -9
> > File bootflash:switch.cfg can not be opened (file not found)
> > -4006-1> (enable)
> >
> > Nice try.
> >
> > See you can't read the file because it is in use and running as I recall
> > and as you can see above - it just won't let you.
> >
> > It's not the typical IOS... Still CatOS.
> >
> > Hope this helps - But I think you already tried what I just displayed.
> >
> >
> >
> >
> >
> > 2009/4/26 W W)W W W W W W <eshedalonie_at_gmail.com>
> >
> >> Main_4006> (enable) write memory
> >> This command is available only in text configuration mode.
> >> Main_4006> (enable)
> >>
> >> Instead I have used
> >>
> >> copy flash config
> >>
> >> set boot auto-config bootflash:current.cfg
> >>
> >> Does anyone have a clue why the switch doesn't allow me to do
> >> write-memory
> >> ?
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Apr 29 2009 - 09:44:08 ART