Re: Unable to Write-Memory in 4006 Cat OS

Darby,

It Says to you
File bootflash:switch.cfg can not be opened (file not found)

When you Do -> copy flash config

It asks you to put the file in bootflash:
and then it says the name of the file.

so I've named it as current.cfg

When I did dir

I Saw the file in bootflash:current.cfg

anyway,

the config-register 0x2 Looks good
http://www.cisco.com/en/US/docs/routers/access/4000/hardware/installation/gui
de/vconfig.html

I Will try that, Thanks Radioactive Frog.

On 4/26/09, Darby Weaver <ccie.weaver_at_gmail.com> wrote:
>
> It's legacy.
>
> When you type a command - it is committed.
>
> You have two commands that rock:
>
> sh config - and save it out to text. - The commands that are manually
> entered and non-default.
>
> sh config all - all the commands - both default and the ones manually
> entered. Careful if you are a tree-hugger...
>
> 4006-1> (enable) sh boot
> BOOT variable = bootflash:cat4000-k8.8-4-7-GLX.bin,1;
> CONFIG_FILE variable = bootflash:switch.cfg
> Configuration register is 0x2102
> ignore-config: disabled
> auto-config: non-recurring
> console baud: 9600
> boot: image specified by the boot system commands
>
>
> 4006-1> (enable) copy bootflash:switch.cfg tftp
> File bootflash:switch.cfg does not exist
> Failed to copy from bootflash:switch.cfg to tftp
>
> -4006-1> (enable) sh file switch.cfg
> error = -9
> File bootflash:switch.cfg can not be opened (file not found)
> -4006-1> (enable) sh file bootflash:switch.cfg
> error = -9
> File bootflash:switch.cfg can not be opened (file not found)
> -4006-1> (enable)
>
> Nice try.
>
> See you can't read the file because it is in use and running as I recall
> and as you can see above - it just won't let you.
>
> It's not the typical IOS... Still CatOS.
>
> Hope this helps - But I think you already tried what I just displayed.
>
>
>
>
>
> 2009/4/26 WW)W WWWW W <eshedalonie_at_gmail.com>
>
>> Main_4006> (enable) write memory
>> This command is available only in text configuration mode.
>> Main_4006> (enable)
>>
>> Instead I have used
>>
>> copy flash config
>>
>> set boot auto-config bootflash:current.cfg
>>
>> Does anyone have a clue why the switch doesn't allow me to do
>> write-memory
>> ?
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Apr 26 2009 - 17:17:58 ART