Re: forwarding the VTP

From the differences point of view, mode OFF will not forward nor read
messages - it won't care.
Also, DOC:
http://www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080094c52.shtml

On Sun, Apr 19, 2009 at 8:12 PM, <aly.groupstudy_at_gmail.com> wrote:

> I recently had a problem where the VTP information were not being
> propagated.
> I tried to find if there are configuration errors that might do it.
>
> 1- Make sure your trunks are up ( Obviously)
> 2- do not hesitate to reboot the switches ( This worked for me more than
> once
> and I will defiantly do it in the lab if i even doubt any strange
> behaviout)
>
> VTP configuration
>
> Cisco Documentation is really poor on this one
> Here is what I think but need others to confirm it
>
> Only VTP V2 transparent mode will forward VLAN info to switches beyond
> VTP V1 transparent mode will only forward VLAN info if the VTP domain
> matches
>
> strange command I saw only recently and never even tried it ( VTP mode off)
>
> Can anyone share his experience about this new command, confirm VTP V1 vs
> V2
> behavior or share any of his troubleshooting experience
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Pavel Bykov
----------------
Don't forget to help stopping the braindumps, use of which reduces value of
your certifications. Sign the petition at http://www.stopbraindumps.com/
Blogs and organic groups at http://www.ccie.net