ip ospf database-filter all out

Hi,

The command "ip ospf database-filter all out" is supposed to filter all
LSA's out to an area one way !
But results seems to be different...?

R3 is connected to R4 via FR pt2pt subif and the command is applied,
The routing table shows IA from different area as well as others too
(omitted)
In short the command didnt make any difference in the RIB.

If anyone could help?

Rack1R3#sh run int s1/0.4
Building configuration...
Current configuration : 217 bytes
!
interface Serial1/0.4 point-to-point
 ip address 180.1.34.3 255.255.255.0
 ip ospf hello-interval 15
 ip ospf database-filter all out
 frame-relay interface-dlci 304

Rack1R4#sir
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static
route
       o - ODR, P - periodic downloaded static route
Gateway of last resort is not set
     1.0.0.0/24 is subnetted, 4 subnets
O IA 1.1.0.0 [110/130] via 180.1.34.3, 00:05:18, Serial1/0.3
O IA 1.1.1.0 [110/130] via 180.1.34.3, 00:05:18, Serial1/0.3
O IA 1.1.2.0 [110/130] via 180.1.34.3, 00:05:18, Serial1/0.3
O IA 1.1.3.0 [110/130] via 180.1.34.3, 00:05:18, Serial1/0.3
O IA 2.0.0.0/8 [110/66] via 180.1.34.3, 00:05:18, Serial1/0.3
O IA 3.0.0.0/8 [110/65] via 180.1.34.3, 00:05:18, Serial1/0.3
     4.0.0.0/24 is subnetted, 5 subnets
C 4.4.0.0 is directly connected, Loopback1

-------omitted-----

Best Regards,
Tharak Abraham Luke

Blogs and organic groups at http://www.ccie.net
Received on Sat Apr 18 2009 - 23:00:19 ART