From: Jason Alex (amr.ccie@gmail.com)
Date: Sun Mar 29 2009 - 10:03:24 ART
Dear All,
The task says
Configure all four switches to use the form of STP where STP options such as
UplinkFast and BackboneFast are no longer required. In addition:
- STP parameters for VLANs 1,10,20,30,40,100,200, and 300 should be dictated
by SW1. SW2
should be the secondary root. SW2, SW3, and SW4 should not be root bridge
for any VLANs.
- The primary and secondary priorities should be at their default values.
So what is the mode we are going to choose , is it rapid-pvst or mst ?
also what is the meaning of STP paramerters should be dictated by sw1 , is
it mean that sw1 should be the root ?
also how to make sw1 is the root without modifying the priority ? as i know
the command "spanning-tree vlan X root primary" modified the priority
Please Advice
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:08 ART