From: Jay Pal (jay.b.pal@gmail.com)
Date: Wed Mar 18 2009 - 19:39:33 ART
Hi Jared,
I had tried shutting the interface and removing the class map and then
applying to the interface before my mail.
After your mail I have done few things: removed all class and all Policy-map
related config. then did a 'default interface' to all main interface and
subinterface. then re-applied. Still the same.
Then I have also did a 'stop R2' on dynamips and did the whole thing again.
I have also removed all TE configuration on all routers. later this evening
I will try to save and reboot my PC and see if this helps.
I guess this would be the time to do a 'reload' in the exam.
Thanks.
Jay
On Thu, Mar 19, 2009 at 12:32 AM, Jared Scrivener
<jscrivener@ipexpert.com>wrote:
> Hey Jay,
>
> Try shutting down the interface, applying the class and then re-enabling
> it.
> Let us know if that works.
>
> Cheers,
>
> Jared Scrivener CCIE3 #16983 (R&S, Security, SP), CISSP
> Technical Instructor - IPexpert, Inc.
> Telephone: +1.810.326.1444
> Fax: +1.810.454.0130
> Mailto: jscrivener@ipexpert.com
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Jay
> Pal
> Sent: Wednesday, 18 March 2009 9:37 AM
> To: Cisco certification
> Subject: SP QoS - subinterface issue
>
> Hi everyone,
>
> I am trying to apply a frame-relay map on to a subinterface of a 7200 and
> it
> keeps giving me 'I/f Serial2/0.12 DLCI 201 class EXP_3 requested bandwidth
> 1000 (kbps), available only 22 (kbps)'. I have configured the interface as
> 45M. Initially, I have TE configured on this interface. The head end TE
> bandwidth is only 10M. But now I have removed it but still I keep on
> getting
> this error. Is there any commands to check how much available bandwidth I
> have on that interface?
>
> Policy Map TO_P
> Class EXP_3
> Bandwidth 1000 (kbps) Max Threshold 64 (packets)
>
> map-class frame-relay FRTS
> no frame-relay adaptive-shaping
> frame-relay cir 45000
> service-policy output TO_P
>
> interface Serial2/0.12 point-to-point
> bandwidth 45000
> ip address 100.1.12.1 255.255.255.0
> mpls traffic-eng tunnels
> mpls ip
> frame-relay interface-dlci 102
> ip rsvp bandwidth 15000
>
> (config-subif)#frame-relay class FRTS
> 'I/f Serial2/0.12 DLCI 201 class EXP_3 requested bandwidth 1000 (kbps),
> available only 22 (kbps)'
>
> I try to add frame-relay class FRTS and error pops up.
>
> Any help is appreciated.
>
> Thanks,
> Jay
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:05 ART