From: Jay Pal (jay.b.pal@gmail.com)
Date: Wed Mar 18 2009 - 10:37:13 ART
Hi everyone,
I am trying to apply a frame-relay map on to a subinterface of a 7200 and it
keeps giving me 'I/f Serial2/0.12 DLCI 201 class EXP_3 requested bandwidth
1000 (kbps), available only 22 (kbps)'. I have configured the interface as
45M. Initially, I have TE configured on this interface. The head end TE
bandwidth is only 10M. But now I have removed it but still I keep on getting
this error. Is there any commands to check how much available bandwidth I
have on that interface?
Policy Map TO_P
Class EXP_3
Bandwidth 1000 (kbps) Max Threshold 64 (packets)
map-class frame-relay FRTS
no frame-relay adaptive-shaping
frame-relay cir 45000
service-policy output TO_P
interface Serial2/0.12 point-to-point
bandwidth 45000
ip address 100.1.12.1 255.255.255.0
mpls traffic-eng tunnels
mpls ip
frame-relay interface-dlci 102
ip rsvp bandwidth 15000
(config-subif)#frame-relay class FRTS
'I/f Serial2/0.12 DLCI 201 class EXP_3 requested bandwidth 1000 (kbps),
available only 22 (kbps)'
I try to add frame-relay class FRTS and error pops up.
Any help is appreciated.
Thanks,
Jay
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:05 ART