From: Tharak Abraham (tharakabraham@gmail.com)
Date: Tue Mar 17 2009 - 19:03:02 ART
Yes !
@ Backbone and Naveed :- I tried out the options with access lists and
prefix lists with the distribute list under the routing process
to make it work.
Are there more methods ? Basically i wanted to explore all other
possibilities.
@ Nadeem :- Dint really understand how offset list would help here as the
objective is to deny the routes being sourced?
If you could explain your point?
Thanks a lot ppl.
BR,
Tharak.
On Tue, Mar 17, 2009 at 11:21 AM, Nadeem Ansari
<nadeem.ansari574@gmail.com>wrote:
> Yeah but if you wanna use that route as a backup path then you wont be able
> to achieve that, on the other hand offset-list gives you that option also :)
>
> Regards
> Nadeem
>
> On Tue, Mar 17, 2009 at 3:11 PM, backbone systems <
> backbone.systems@gmail.com> wrote:
>
>> U can use distribute list in router mode to deny a particular route
>> from a particular interface.....
>>
>> router rip
>> distribute-list 1 out serial 1/0
>> distribute-list 2 out serial 2/0
>>
>> access-list 1 deny 3.0.0.0 0.255.255.255
>> access-list 1 permit any
>> access-list 2 deny 33.0.0.0 0.255.255.255
>> access-list 2 permit any
>>
>> HTH
>>
>> On Tue, Mar 17, 2009 at 11:20 AM, Nadeem Ansari
>> <nadeem.ansari574@gmail.com> wrote:
>> > Hi,
>> >
>> > 1) You can use offset-list while increasing hop count for a perticular
>> route
>> > learned from an interface.
>> >
>> > Regards
>> > Nadeem
>> > On Tue, Mar 17, 2009 at 3:31 AM, Tharak Abraham <
>> tharakabraham@gmail.com>wrote:
>> >
>> >> Router R3 advertising RIPv2 routes 3.0.0.0/8 and 33.0.0.0/8 out two
>> >> interfaces s1/0 (frame relay) and s2/0(serial)
>> >> As Both these interfaces are connected to the same router, theres a
>> need to
>> >> filter redundant routes !
>> >>
>> >> What are the available methods by which i could permit 3.0.0.0/8 out
>> of
>> >> s2/0
>> >> and 33.0.0.0/8 out of s1/0 respectively and selectively ?
>> >> Please refer the diag below.
>> >>
>> >> 33.0.0.0/8 (lo1)
>> >> |
>> >> (13.0.0.3) s2/0 -------- R3 (RIPv2)------- s1/0 (12.0.0.3)
>> >> |
>> >> 3.0.0.0/8 (lo2)
>> >>
>> >>
>> >> BR,
>> >> Tharak.
>> >>
>> >>
>> >> Blogs and organic groups at http://www.ccie.net
>> >>
>> >> _______________________________________________________________________
>> >> Subscription information may be found at:
>> >> http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:05 ART