From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Sat Feb 14 2009 - 11:40:45 ARST
Thats what i though also
wanted some comments from the group as well .. hence drafted a mail .
thnx
On Sat, Feb 14, 2009 at 6:56 PM, karim jamali <karim.jamali@gmail.com>wrote:
> Hey,
>
> With physical frame-relay interfaces two choices exists (inverse-arp and
> static mapping).
> Since both are not allowed and the physical frame-relay is imposed,the only
> solution is PPP over Frame-Relay/
>
> I dont see anything wrong with your choice of solution.
>
> Regards,
>
> On Sat, Feb 14, 2009 at 12:46 PM, GAURAV MADAN <
> gauravmadan1177@gmail.com> wrote:
>
>> Hi
>>
>> Althogh I know of solution ; sometimes its the wording that i dont
>> understand ... This time I had a task stating :
>>
>>
>> R1 ------------ Fr --------------------- R2
>>
>>
>> [A] Use only physical interfaces to configure FR between R1 and R2
>> [B] Do not use frame-relay map CLI
>> [C] R2 shoud not send frame-relay inverse-arp request out FR cloud
>>
>> My interpretation
>> ---------------------------
>> [A] i cant use p2p or p2multipoint sub interface
>> [B] alright .. clear .. i cant use map
>> [C] i will issue "no frame-rel inverse-arp" on R2 ..
>>
>>
>> I came with following sol (PPPoFR)
>>
>> Rack1R2(config-if)#do sh run int s0/0/0
>> Building configuration...
>> Current configuration : 230 bytes
>> !
>> interface Serial0/0/0
>> no ip address
>> ip pim sparse-mode
>> encapsulation frame-relay
>> no fair-queue
>> frame-relay traffic-shaping
>> frame-relay interface-dlci 201 ppp Virtual-Template1 <<<<<<<
>> class TEST
>> no frame-relay inverse-arp
>> end
>>
>>
>> Same on R1 as well
>>
>> 1) I have not used sub int . its on main interface only
>> 2) No map statement used .
>> 3) I am not sending inverse arp req as well
>>
>>
>> Which requirement have I violated ? Please suggest
>>
>> Best Regards
>> Gaurav Madan
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> KJ
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:11 ARST