From: TCP IP4 (tcp.ip4@gmail.com)
Date: Fri Feb 06 2009 - 06:14:10 ARST
Say if I don't want to make permanent configuration change, is there a
session based "exec-timeout 0 0"?
On Thu, Feb 5, 2009 at 11:16 PM, Ravi Singh <way2ccie@googlemail.com> wrote:
> As Tony said "exec-timeout 0 0" or "no exec-timeout" is the solution and for
> me this is one of the commands that I configure the first thing on a rack
> along with a few aliases, "no ip domain lookup " etc.
>
> Regards,
> Ravi
>
> On Fri, Feb 6, 2009 at 5:27 AM, mahmoud genidy <ccie.mahmoud@gmail.com>wrote:
>
>> Hi GS
>>
>> I'm using CRT and I have to manually set the options to send (space
>> charachter every ten minutes for example) to overcome the session idle
>> timeout. Doing this in the lab will consume at least five minutes to
>> customize CRT. Any other solution?
>>
>> I'm not sure if session time-out & absolute time-out line commands are the
>> solution for this kind of issue.
>>
>> Any body can help?
>>
>> Thanks,
>> M Genidy
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:10 ARST