From: Nick (ccieaz@googlemail.com)
Date: Mon Jan 26 2009 - 11:48:45 ARST
yes could override it but just seems strange the Doc CD says 10, IE say 20,
but from a quick test IOS says 1.
Must be missing something :)
2009/1/26 Alexei Monastyrnyi <alexeim73@gmail.com>
> Hi.
>
> You can try a "default-metric 20" in router configuration mode.
>
> That wouldn't violate the task I guess.
>
> HTH,
> A.
>
>
> Nick wrote:
>
>> Hi All
>>
>> Working through the IE Vol 1 Version 5 workbook I see this in the notes:
>>
>> "without additional arguments on the command the default route would have
>> been advertised as a Type-2 External route with a metric of 20"
>>
>> I tested this out, but I see the metric as 1. Is 20 a mistake in the IE
>> document or did I miss something?
>>
>> Rack1R6#show run | sec router ospf
>> router ospf 1
>> log-adjacency-changes
>> network 0.0.0.0 255.255.255.255 area 0
>> default-information originate always
>>
>> Rack1R4#show ip route ospf
>> <...>
>> O*E2 0.0.0.0/0 [110/1] via 155.1.146.6, 01:08:39, FastEthernet0/1
>>
>> Rack1R4#show ip ospf database external 0.0.0.0
>>
>> OSPF Router with ID (150.1.4.4) (Process ID 1)
>>
>> Type-5 AS External Link States
>>
>> Routing Bit Set on this LSA
>> LS age: 344
>> Options: (No TOS-capability, DC)
>> LS Type: AS External Link
>> Link State ID: 0.0.0.0 (External Network Number )
>> Advertising Router: 150.1.6.6
>> LS Seq Number: 80000003
>> Checksum: 0x9577
>> Length: 36
>> Network Mask: /0
>> Metric Type: 2 (Larger than any link state path)
>> TOS: 0
>> Metric: 1
>> Forward Address: 0.0.0.0
>> External Route Tag: 1
>>
>>
>>
>
>
-- ---Nick
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST