From: Nick (ccieaz@googlemail.com)
Date: Mon Jan 26 2009 - 10:53:18 ARST
Hi All
Working through the IE Vol 1 Version 5 workbook I see this in the notes:
"without additional arguments on the command the default route would have
been advertised as a Type-2 External route with a metric of 20"
I tested this out, but I see the metric as 1. Is 20 a mistake in the IE
document or did I miss something?
Rack1R6#show run | sec router ospf
router ospf 1
log-adjacency-changes
network 0.0.0.0 255.255.255.255 area 0
default-information originate always
Rack1R4#show ip route ospf
<...>
O*E2 0.0.0.0/0 [110/1] via 155.1.146.6, 01:08:39, FastEthernet0/1
Rack1R4#show ip ospf database external 0.0.0.0
OSPF Router with ID (150.1.4.4) (Process ID 1)
Type-5 AS External Link States
Routing Bit Set on this LSA
LS age: 344
Options: (No TOS-capability, DC)
LS Type: AS External Link
Link State ID: 0.0.0.0 (External Network Number )
Advertising Router: 150.1.6.6
LS Seq Number: 80000003
Checksum: 0x9577
Length: 36
Network Mask: /0
Metric Type: 2 (Larger than any link state path)
TOS: 0
Metric: 1
Forward Address: 0.0.0.0
External Route Tag: 1
-- ---Thanks
Nick
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:40 ARST