From: Sadiq Yakasai (sadiqtanko@gmail.com)
Date: Thu Jan 15 2009 - 11:23:11 ARST
OR simply just configure another router behind the RP and see if it would
get the AutoRP announcement.
On Thu, Jan 15, 2009 at 1:19 PM, CiSco Champ <cischamp2009@gmail.com> wrote:
> i configured on FR hub and spoke topology where R1 is hub and R2,R3 are
> spoke. R1 is configured for AutoRP and Maping agent. so if i move my RP to
> spoke then it will not work ?
>
>
> On Thu, Jan 15, 2009 at 5:14 PM, Sadiq Yakasai <sadiqtanko@gmail.com>wrote:
>
>> From memory, I would think you have all devices been directly adjacent to
>> each other (or at least the router doing the AutoRP advertisements). Try
>> configuring a device at least 2 hops away and you would see the behavior you
>> are expecting.
>>
>> In other words, to make Auro-RP work when there is a transit device
>> configured for Sparse Mode only, then you would need the Auto-rp-listener
>> command.
>>
>> Lab up and let us know how you get on.
>>
>> HTH,
>> Sadiq
>>
>
>
-- CCIE #19963Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:38 ARST