From: CiSco Champ (cischamp2009@gmail.com)
Date: Thu Jan 15 2009 - 11:46:27 ARST
ok in my scenario, neither need sparse-dense nor listener
On Thu, Jan 15, 2009 at 5:23 PM, Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
> OR simply just configure another router behind the RP and see if it would
> get the AutoRP announcement.
>
>
> On Thu, Jan 15, 2009 at 1:19 PM, CiSco Champ <cischamp2009@gmail.com>wrote:
>
>> i configured on FR hub and spoke topology where R1 is hub and R2,R3 are
>> spoke. R1 is configured for AutoRP and Maping agent. so if i move my RP to
>> spoke then it will not work ?
>>
>>
>> On Thu, Jan 15, 2009 at 5:14 PM, Sadiq Yakasai <sadiqtanko@gmail.com>wrote:
>>
>>> From memory, I would think you have all devices been directly adjacent to
>>> each other (or at least the router doing the AutoRP advertisements). Try
>>> configuring a device at least 2 hops away and you would see the behavior you
>>> are expecting.
>>>
>>> In other words, to make Auro-RP work when there is a transit device
>>> configured for Sparse Mode only, then you would need the Auto-rp-listener
>>> command.
>>>
>>> Lab up and let us know how you get on.
>>>
>>> HTH,
>>> Sadiq
>>>
>>
>>
>
>
> --
> CCIE #19963
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:38 ARST