From: CiSco Champ (cischamp2009@gmail.com)
Date: Thu Jan 15 2009 - 11:19:28 ARST
i configured on FR hub and spoke topology where R1 is hub and R2,R3 are
spoke. R1 is configured for AutoRP and Maping agent. so if i move my RP to
spoke then it will not work ?
On Thu, Jan 15, 2009 at 5:14 PM, Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
> From memory, I would think you have all devices been directly adjacent to
> each other (or at least the router doing the AutoRP advertisements). Try
> configuring a device at least 2 hops away and you would see the behavior you
> are expecting.
>
> In other words, to make Auro-RP work when there is a transit device
> configured for Sparse Mode only, then you would need the Auto-rp-listener
> command.
>
> Lab up and let us know how you get on.
>
> HTH,
> Sadiq
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:38 ARST