From: Sergei Udovenko (udovenko@gmail.com)
Date: Tue Jan 06 2009 - 10:34:54 ARST
Hello to all CCIE candidates!
I've the following topology:
lo:1.1.1.x->R1---R2----R3
R1 - area 1
R2 - ABR
R3 - area 0
The issue that I want that 1.1.1.x will not be advertised to the R2(ABR) and
all other routers int area 0. So the problem here is that I want to find
workaround to filter route in intra- area and not on ABR with area 1 range
1.1.1.0 255.255.255.0 not-advertise command. Also because there are about 20
routers in area 0 that shouldn't receive 1.1.1.x and I don't want to
use distribute-list
x in on each router in area 0 to filter the local routing table on each
router.
May be some of you have any suggestion how to get this workaround?
--------------------
Best regards,
Sergei
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:36 ARST