From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Tue Dec 30 2008 - 15:35:11 ARST
correct .. NM-1FE-2W is not supported in 28xx. Also NM-2FE2W is not
supported in 28xx .
if u just wanna increase number of FE L3 ports in 28xx ; i think u have to
go with HWIC -1FE or 2FE .. atlease I am not aware of anything else .
Gaurav Madan
On Tue, Dec 30, 2008 at 10:25 PM, Haroon <itguy.pro@gmail.com> wrote:
> So, If i were to get NM-1FE2W, it would support it?
>
> This is what cisco's website says:
>
> Q: Which network modules are not supported on the Cisco 2811, 2821, and
> 2851?
> A. Table 3 shows the network modules that the Cisco 2811, 2821, and 2851
> routers do not support.
>
>
> http://www.cisco.com/en/US/prod/collateral/routers/ps5854/prod_qas0900aecd80169bd6.html
>
> Thanks,
>
> Haroon
>
>
> On Tue, Dec 30, 2008 at 11:35 AM, Joe Rinehart <jjrinehart@hotmail.com>wrote:
>
>> The 2801 does not have an NM slot but the 2811/2821/2851 certainly do...
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>> Haroon
>> Sent: Monday, December 29, 2008 7:57 PM
>> To: GAURAV MADAN
>> Cc: Tony Varriale; Tyson Scott; Cisco certification
>> Subject: Re: Cisco 2800s and HWICs
>>
>> As far as I can tell from Cisco's website, NM modules are not supported on
>> 2800s... or do they just want customers to buy HWICs?
>>
>> Thank you
>>
>> On Mon, Dec 29, 2008 at 10:26 PM, GAURAV MADAN
>> <gauravmadan1177@gmail.com>wrote:
>>
>> > Hi All
>> >
>> > PLease note that convertible port ( L2 ; L3 using a no switchport /
>> > switchport command ) is not available on HWICs.
>> > HWIC will be either L2 ( like 4ESW ; HWIC-D-9ESW ) or L3 ( like HWIC-1FE
>> > and
>> > HWIC-2FE)
>> >
>> > For things that u wish ; please take a moment to look in NMs available .
>> >
>> > However I am not sure abt cost and what budget u have ..
>> >
>> > Gaurav Madan.
>> >
>> > On Tue, Dec 30, 2008 at 7:26 AM, Tony Varriale
>> > <tvarriale@flamboyaninc.com>wrote:
>> >
>> > > With "no switchport", that would infer a router interface not a
>> > switchport.
>> > > That feature is not supported on the HWIC.
>> > >
>> > > And FYI, those old 6500 days aren't gone.
>> > >
>> > > tv
>> > >
>> > > -----Original Message-----
>> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
>> Of
>> > > Tyson Scott
>> > > Sent: Monday, December 29, 2008 6:12 PM
>> > > To: Tony Varriale
>> > > Cc: Hobbs; Cisco certification
>> > > Subject: Re: Cisco 2800s and HWICs
>> > >
>> > > Tony,
>> > >
>> > > I guess all I am saying is configure the port as a layer2 port and
>> > > configure the layer3 interface.
>> > >
>> > > Just the same way as the old hybrid 6500 days.
>> > >
>> > > RTR#sh run int f0/3/0
>> > > interface FastEthernet0/3/0
>> > > switchport trunk native vlan 200
>> > > switchport mode trunk
>> > > switchport voice vlan 400
>> > > end
>> > >
>> > > RTR#sh ip int brief
>> > > Interface IP-Address OK? Method Status
>> > > Protocol
>> > > FastEthernet0/3/0 unassigned YES unset up
>> > > up
>> > > FastEthernet0/3/1 unassigned YES unset up
>> > > down
>> > > FastEthernet0/3/2 unassigned YES unset up
>> > > down
>> > > FastEthernet0/3/3 unassigned YES unset up
>> > > down
>> > > Vlan200 10.10.102.1 YES manual up
>> > > up
>> > > Vlan400 10.10.202.1 YES manual up
>> > > up
>> > >
>> > > On Mon, Dec 29, 2008 at 7:03 PM, Tony Varriale
>> > > <tvarriale@flamboyaninc.com> wrote:
>> > > > Not going to happen. They are l2 only.
>> > > >
>> > > > tv
>> > > >
>> > > > -----Original Message-----
>> > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>> Behalf
>> > Of
>> > > > Hobbs
>> > > > Sent: Monday, December 29, 2008 5:57 PM
>> > > > To: Haroon
>> > > > Cc: Cisco certification
>> > > > Subject: Re: Cisco 2800s and HWICs
>> > > >
>> > > > If cost is an issue I would check get the hwic-4esw if it allows "no
>> > > > switchport". I don't have one to verify. If it's for lab purposes it
>> > > should
>> > > > be fine. An online rack I use has a 2800 with a nm-16esw and it
>> allows
>> > > the
>> > > > no switchport command.
>> > > >
>> > > > Does anyone here know?
>> > > >
>> > > > On Mon, Dec 29, 2008 at 4:39 PM, Haroon <itguy.pro@gmail.com>
>> wrote:
>> > > >
>> > > >> Thanks Hobbs.
>> > > >>
>> > > >> I was just looking at those documents.
>> > > >>
>> > > >> It seems HWIC-1FE would be a better option but are bit expensive
>> > > though,
>> > > >> is anybody selling HWIC-1FE, I need 4 or 5 pieces?
>> > > >>
>> > > >> Thanks,
>> > > >>
>> > > >> Haroon
>> > > >>
>> > > >>
>> > > >> On Mon, Dec 29, 2008 at 6:34 PM, Hobbs <deadheadblues@gmail.com>
>> > wrote:
>> > > >>
>> > > >>> Hi,
>> > > >>>
>> > > >>>
>> > > >>>
>> > > >
>> > >
>> > >
>> >
>>
>> http://www.cisco.com/en/US/products/ps5854/products_relevant_interfaces_and_
>> > > > modules.html
>> > > >>>
>> > > >>>
>> > > >>>
>> > > >
>> > >
>> > >
>> >
>>
>> http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet
>> > > > 0900aecd80581fe6_ps5853_Products_Data_Sheet.html
>> > > >>>
>> > > >>> I believe the switch module interfaces can be converted to routed
>> > ports
>> > > >>> with the "no switchport" command. Don't know if all the switch
>> > modules
>> > > >>> support it though. Otherwise take a look at the links above for
>> > > HWIC-1FE.
>> > > >>>
>> > > >>> hth
>> > > >>>
>> > > >>> On Mon, Dec 29, 2008 at 3:51 PM, Haroon <itguy.pro@gmail.com>
>> wrote:
>> > > >>>
>> > > >>>> Hello Experts,
>> > > >>>>
>> > > >>>> I have couple of 2811s and few 2821s. I need to add 2 additional
>> > > >>>> Fast-Ethernet interfaces on each of these routers, what is the
>> best
>> > > way
>> > > >>>> to
>> > > >>>> go about doing that? Which module (part#?) would allow layer3
>> > > > capability?
>> > > >>>>
>> > > >>>> I understand HWIC-4ESW would but isn't that a switch which
>> doesn't
>> > > > really
>> > > >>>> do
>> > > >>>> routing on it self but forwards it to the host?
>> > > >>>>
>> > > >>>> Please help.
>> > > >>>>
>> > > >>>> Thanks,
>> > > >>>>
>> > > >>>> Haroon
>> > > >>>>
>> > > >>>>
>> > > >>>> Blogs and organic groups at http://www.ccie.net
>> > > >>>>
>> > > >>>>
>> > >
>> _______________________________________________________________________
>> > > >>>> Subscription information may be found at:
>> > > >>>> http://www.groupstudy.com/list/CCIELab.html
>> > > >
>> > > >
>> > > > Blogs and organic groups at http://www.ccie.net
>> > > >
>> > > >
>> _______________________________________________________________________
>> > > > Subscription information may be found at:
>> > > > http://www.groupstudy.com/list/CCIELab.html
>> > > >
>> > > >
>> > > > Blogs and organic groups at http://www.ccie.net
>> > > >
>> > > >
>> _______________________________________________________________________
>> > > > Subscription information may be found at:
>> > > > http://www.groupstudy.com/list/CCIELab.html
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > > >
>> > >
>> > >
>> > >
>> > > --
>> > > Tyson Scott - CCIE #13513 R&S and Security
>> > > Technical Instructor - IPexpert, Inc.
>> > >
>> > > Telephone: +1.810.326.1444
>> > > Fax: +1.810.454.0130
>> > > Mailto: tscott@ipexpert.com
>> > >
>> > > Join our free online support and peer group communities:
>> > > http://www.IPexpert.com/communities
>> http://www.ipexpert.com/communities
>> > >
>> > >
>> > > IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On
>> > > Demand and Audio Certification Training Tools for the Cisco CCIE R&S
>> > > Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
>> > > CCIE Storage Lab Certifications.
>> > >
>> > >
>> > > Blogs and organic groups at http://www.ccie.net
>> > >
>> > >
>> _______________________________________________________________________
>> > > Subscription information may be found at:
>> > > http://www.groupstudy.com/list/CCIELab.html
>> > >
>> > >
>> > > Blogs and organic groups at http://www.ccie.net
>> > >
>> > >
>> _______________________________________________________________________
>> > > Subscription information may be found at:
>> > > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:10 ARST