From: john matijevic (john.matijevic@gmail.com)
Date: Sat Dec 27 2008 - 11:31:51 ARST
Hello Sony,
Have you run a site survey?
I would try using a different channel. Also how far away are you from the
access point. If you have a laptop to test, try moving your laptop close to
the access point. Also in your config I do not see a bridge 1 protocol ieee.
Please add this command.
Sincerely,
John
On Sat, Dec 27, 2008 at 7:15 AM, sony darrel <sonydarrel@gmail.com> wrote:
> HI Experts,
>
> I have a connection to my ISP with a good enough bandwidth, when i
> download
> a file from my ISP website
>
> through a wired network it gives me 7.00 MBPS transfer rate but on the
> same
> port when i connect cisco 1310 series
>
> wireless access point it gives me only 2Mbps transfer rate,WHY?.I have only
> configured the SSID and radio interface is enabled
>
> Nothing else i have done on wireless.Speed for fastethernet is AUTO and
> duplex is also AUTO.
>
> Can Anyone help me
>
>
> Here r the wireless configs
>
> SH RUN
> Building configuration...
>
> Current configuration : 1249 bytes
> !
> version 12.2
> no service pad
> service timestamps debug datetime msec
> service timestamps log datetime msec
> service password-encryption
> !
> hostname XXXXXX
> !
> enable secret 5 $1$nuBr$VafNdu1HsCmtbHlm7HmaO0
> !
> username Cisco password 7 106D000A0618
> username admin password 7 07152041411B18
> ip subnet-zero
> !
> !
> bridge irb
> !
> !
> interface Dot11Radio0
> no ip address
> no ip route-cache
> !
> ssid XXXXXX
> authentication open
> guest-mode
> !
> speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
> rts threshold 2312
> station-role root
> bridge-group 1
> bridge-group 1 subscriber-loop-control
> bridge-group 1 block-unknown-source
> no bridge-group 1 source-learning
> no bridge-group 1 unicast-flooding
> bridge-group 1 spanning-disabled
> !
> interface FastEthernet0
> no ip address
> no ip route-cache
> duplex auto
> speed auto
> bridge-group 1
> no bridge-group 1 source-learning
> bridge-group 1 spanning-disabled
> !
> interface BVI1
> ip address 172.27.101.49 255.255.255.0
> no ip route-cache
> !
> ip http server
> ip http help-path
> http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivory/1100
> ip radius source-interface BVI1
> bridge 1 route ip
> !
> !
> line con 0
> line vty 0 4
> password 7 021C055604140E
> login
> line vty 5 15
> login
> !
> end
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:10 ARST