From: sony darrel (sonydarrel@gmail.com)
Date: Sat Dec 27 2008 - 10:15:41 ARST
HI Experts,
I have a connection to my ISP with a good enough bandwidth, when i download
a file from my ISP website
through a wired network it gives me 7.00 MBPS transfer rate but on the same
port when i connect cisco 1310 series
wireless access point it gives me only 2Mbps transfer rate,WHY?.I have only
configured the SSID and radio interface is enabled
Nothing else i have done on wireless.Speed for fastethernet is AUTO and
duplex is also AUTO.
Can Anyone help me
Here r the wireless configs
SH RUN
Building configuration...
Current configuration : 1249 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname XXXXXX
!
enable secret 5 $1$nuBr$VafNdu1HsCmtbHlm7HmaO0
!
username Cisco password 7 106D000A0618
username admin password 7 07152041411B18
ip subnet-zero
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid XXXXXX
authentication open
guest-mode
!
speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
rts threshold 2312
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 172.27.101.49 255.255.255.0
no ip route-cache
!
ip http server
ip http help-path
http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivory/1100
ip radius source-interface BVI1
bridge 1 route ip
!
!
line con 0
line vty 0 4
password 7 021C055604140E
login
line vty 5 15
login
!
end
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:10 ARST