From: John Hooper (homith@homith.com)
Date: Wed Dec 17 2008 - 06:53:26 ARST
G'Day,
Are both Fa0/21 & Fa0/22 exactly the same ? Start with a default
interface on both those interfaces and try again.
Cheers
John
----- Original Message -----
From: "Raghav Bhargava" <raghavbhargava12@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Wednesday, December 17, 2008 7:32 PM
Subject: Etherchannel
> Hi Experts,
>
> I am getting the following Error message when I try to create Layer 2
> Etherchannel..
>
> cat-1(config-if-range)#channel-gr
> cat-1(config-if-range)#channel-group 1 mode on
> cat-1(config-if-range)#
> 01:32:31: %EC-5-CANNOT_BUNDLE2: Fa0/21 is not compatible with Po1 and
> will be suspended (vlan mask is different)
> 01:32:31: %EC-5-CANNOT_BUNDLE2: Fa0/22 is not compatible with Po1 and
> will be suspended (vlan mask is different)
> 01:32:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/21, changed state to down
> 01:32:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/22, changed state to down
>
> There is no IP on the interfaces fa0/21and 22.
>
> Can you please tell me whats wrong in this.
>
> --
> Warm Regards
> Raghav
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:09 ARST