From: Pavel Bykov (slidersv@gmail.com)
Date: Sun Nov 30 2008 - 14:27:58 ARST
6. area default-cost
http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfospf.html#wp1017486
7. area range x.x.x.x y.y.y.y cost
http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfospf.html#wp1017596
8. compatible rfc1583
http://www.cisco.com/en/US/docs/ios/12_2/iproute/command/reference/1rfospf.html#wp1048306
9. bandwidth keyword on the interface :) But that I will count as "auto-cost
reference-bw". So not 9, but 8. And you can also maybe combine 4 and 5.
such list would require order of preference as well, when multiple commands
are entered.
I think for neighbor on multipoint networks:
1. neighbor cost
2. ip ospf cost
3. auto cost
For neighbor on other networks:
1. ip ospf cost
2. auto cost
For summary networks:
1. area range cost
2. compatible rfc1583
For NSSA/STUB
1. area default-cost
For redistributed networks
1. route-map
2. redistribution key-word
Am I correct? Anything else that can change cost?
On Sun, Nov 30, 2008 at 1:56 AM, Christopher Copley
<copley.chris@gmail.com>wrote:
> Group,
>
> I need a sanity check here. I am working on OSPF and looking for all ways
> to change cost, I have found 5 i think...
>
> Can change cost by
>
> 1. ( router)# auto-cost reference-bandwidth xx
> 2. ( router)# neighbor x.x.x.x cost xx
> 3. (-if)# ip ospf cost xx
> 4. route-map
> 5. redistribution
>
> NOTE: for #2 to work on the neighbor all interfaces need to be
> point-to-multipoint
>
> Have I missed any other ways?
>
> Chris
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Pavel Bykov ---------------- Don't forget to help stopping the braindumps, use of which reduces value of your certifications. Sign the petition at http://www.stopbraindumps.com/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:32 ARST