From: Peter Beukenkamp (peter@beukenkamp.nl)
Date: Sun Nov 30 2008 - 14:21:56 ARST
If you have a VLAN100 SVI interface on both SW3 and SW4 I would create a
layer 2 etherchannel and make them static access (switchport mode
access) and place them in VLAN100. Thus not enabling trunking...
khurram noor wrote:
> i am practicing ie core workbook lab6. its task 2.3 states that:
>
> *Configure SW3 and SW4 so that traffic between their VLAN 100 interfaces is
> load balanced on interface Fa0/19 Fa0/21.*
>
> *Do not enable trunking between SW3 and SW4 to accomplish this.*
>
> can anyone explain... does this question means creating a layer 3
> etherchannel which will be containing following members
>
> on both SW3 and SW4 (IP addresses 145.1.100.9 and 145.1.100.10 on L3
> etherchannel interfaces)
>
> 1. VLAN 100 (SVI interface)
>
> 2. Interfaces f0/19 -f0/21
>
> Please help as im unable to understand it completely
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:32 ARST