From: Radioactive Frog (pbhatkoti@gmail.com)
Date: Sun Nov 16 2008 - 08:12:34 ARST
correction to my earlier post.
all ephone-dn 1 thourgh 4 should have dual line and the number should be
5001 (like we do in octel-line)
then assign it to the phone using
ephpone 1
button 1o2,3,4 (in overley fashio).
cheers
On Sun, Nov 16, 2008 at 7:57 PM, Radioactive Frog <pbhatkoti@gmail.com>wrote:
> Hi buddy,
>
> Not really - you can increase number of buttons;
>
> step1 - go to telephony service <config t<
> step2 -
>
> cme(config)#ephone 1
> cme(config)#ephone-type 7937G
> cme(config-if)#device-id 431
> cme(config-if)#device-name Cisco 7937G..blah
> cme(config-if)#max-buttons 4 <----------------------Change here
>
> then create phone buttons:
>
> e.g.
> ephone-dn 1 dual-line
> number 5001
> ephone-dn 2 dual-line
> number 5002
> b.,ah.... till ephone-dn 4
>
> then go to ephone and attach these button to the phone e.g.
>
> ephone-dn 1
> buttom 1:1 2:2 3:3 4:4
>
> OR when u say octel -line is superub feature my comment was its not new you
> cud have done it without octo line by attaching multiple buttons. Of course
> it makes life easier to just have 1 command.
>
>
> Make sense?
>
> Make sure you've the right cme firmware image. CME 4.3 can support upto 8
> party conference.
>
> -Frog
> CCIE#21569 (voice)
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST