From: Deepinder Babbar (dsbabbar@gmail.com)
Date: Wed Nov 19 2008 - 10:03:10 ARST
Hi Frog,
Thanks a lot for the reply, I would definitely try out overlay it's an
excellet option for CME pre 4.3 v.
Regards
On Sun, Nov 16, 2008 at 1:12 PM, Radioactive Frog <pbhatkoti@gmail.com>wrote:
> correction to my earlier post.
>
> all ephone-dn 1 thourgh 4 should have dual line and the number should be
> 5001 (like we do in octel-line)
> then assign it to the phone using
> ephpone 1
> button 1o2,3,4 (in overley fashio).
>
> cheers
>
>
>
> On Sun, Nov 16, 2008 at 7:57 PM, Radioactive Frog <pbhatkoti@gmail.com>wrote:
>
>> Hi buddy,
>>
>> Not really - you can increase number of buttons;
>>
>> step1 - go to telephony service <config t<
>> step2 -
>>
>> cme(config)#ephone 1
>> cme(config)#ephone-type 7937G
>> cme(config-if)#device-id 431
>> cme(config-if)#device-name Cisco 7937G..blah
>> cme(config-if)#max-buttons 4 <----------------------Change here
>>
>> then create phone buttons:
>>
>> e.g.
>> ephone-dn 1 dual-line
>> number 5001
>> ephone-dn 2 dual-line
>> number 5002
>> b.,ah.... till ephone-dn 4
>>
>> then go to ephone and attach these button to the phone e.g.
>>
>> ephone-dn 1
>> buttom 1:1 2:2 3:3 4:4
>>
>> OR when u say octel -line is superub feature my comment was its not new
>> you cud have done it without octo line by attaching multiple buttons. Of
>> course it makes life easier to just have 1 command.
>>
>>
>> Make sense?
>>
>> Make sure you've the right cme firmware image. CME 4.3 can support upto 8
>> party conference.
>>
>> -Frog
>> CCIE#21569 (voice)
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:31 ARST