RE: problem with dynamips

From: Shaughn Smith (Shaughn.Smith@za.verizonbusiness.com)
Date: Wed Nov 12 2008 - 11:57:05 ARST

Next message: Pavel Bykov: "Re: virtual-template with multilink ppp confusion...."
Previous message: Fahad Khan: "Re: How to determine using Ip mroute for RPF CHeck or not ?"
Maybe in reply to: ciz: "problem with dynamips"
Next in thread: Shogo Kobayashi: "Re: problem with dynamips"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Do you start the routers, go into enable mode, then get the idlepc value ?

I run about 14 routers on Linux and it runs 100%

Winblows really isn't ideal for GNS/Dynamips

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of ciz
Sent: Wednesday, November 12, 2008 3:51 PM
To: Cisco certification
Subject: problem with dynamips

Hi all,

im currently using dynamips in my widows OS laptop (intel core 2 due
2.00GHz with 2 GB RAM)..but im having some problems in doing a whole lab
with it. Up to OSPF its working quite fine with 2 / 3 % of the cpu
process.but once i start configuring BGP the process goes to 80 to 90 % .
any ideas regarding this problem !!!!!

Any advice is greatly appreciated.

-- thank you ciz

Blogs and organic groups at http://www.ccie.net

Next message: Pavel Bykov: "Re: virtual-template with multilink ppp confusion...."
Previous message: Fahad Khan: "Re: How to determine using Ip mroute for RPF CHeck or not ?"
Maybe in reply to: ciz: "problem with dynamips"
Next in thread: Shogo Kobayashi: "Re: problem with dynamips"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST