Re: problem with dynamips

From: Shogo Kobayashi (k.shogo@gmail.com)
Date: Wed Nov 12 2008 - 12:00:51 ARST

Hi Ciz,

i had almost the same situation before.

without bgp, dynamips worked fine with about 10% or less cpu utilization.
but with bgp, cpu util sticked to something like 100%.

i changed the value of idlepc, then cpu utilization dramatically decreased.
i can run 14 fully configured routers with 70 % or like that now on my
laptop.

i recommend you to get idlepc value with a router which runs with full
configuration, then put that value on all other routers.

regards.
On Wed, Nov 12, 2008 at 10:51 PM, ciz <cizbee@gmail.com> wrote:

> Hi all,
>
> im currently using dynamips in my widows OS laptop (intel core 2 due
> 2.00GHz with 2 GB RAM)..but im having some problems in doing a whole lab
> with it. Up to OSPF its working quite fine with 2 / 3 % of the cpu
> process.but once i start configuring BGP the process goes to 80 to 90 % .
> any ideas regarding this problem !!!!!
>
> Any advice is greatly appreciated.
> --
> thank you
> ciz
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
$B>.NS(B $B>O8c(B Shogo KOBAYASHI
k.shogo@gmail.com (e-mail)
skype name: shogo2022

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST