From: Muhammad Zubair (zubair@jonzu.com)
Date: Tue Nov 04 2008 - 04:55:18 ARST
Dear Stephen Skinner,
no doute your are correct... this value is still
unuse. there is no effect what so ever you use for TOS.
Regards,
Muhammad
Zubair Ansari.
Cell: 0545860370
----------------------------------------
From: "stephen skinner" <stephenski@gmail.com>
Sent: Tuesday, November 04,
2008 12:44 AM
To: "Raghav Bhargava" <raghavbhargava12@gmail.com>
Subject:
Re: Regarding the metric weight command in EIGRP
from the CCO
metric
weights -
<0-8> Type Of Service (Only TOS 0 supported)
there was/are going
to be extenstion to EIGRP to allow you to confiugre
different levels of TOS
within an eigrp Domain.
i.e TOS level 1 uses bandwidth , TOS 2 uses delay
...
i dont thinks that has happened yet/is going to happen, (please correct
me
if i am wrong)
for the lab , its not something to worry about ..
you
can only use the default of 0
HTH
On Tue, Nov 4, 2008 at 11:42 AM,
Raghav Bhargava
> wrote:
> Hi Experts,
>
> I have one doubt in EIGRP .
When we want to change the Bandwidth and
> the Delay values i.e--the K values
in EIGRP the command is :-
>
> (config-router)# metric weight 0 1 0 0 0 0
>
> My doubt is the first value which is 0 is for TOS. What exactly do we
>
mean by that and what does it do??
>
> --
> Warm Regards
> Raghav
>
>
>
Blogs and organic groups at http://www.ccie.net
>
>
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:29 ARST