From: CCIE_SP (maniac.smg@gmail.com)
Date: Mon Nov 03 2008 - 07:05:06 ARST
Hi Gents
I need some help with traffic manipulation with OSPF running over a VRF
HEre is the topology
VPNV4
R4 ---------------------------- R5
OSPF area 0
R1 --------------------------- R3
Ok so its pretty simple, we have OSPF running between R4 and R1 in a VRF and
between R5 and R3 in a VRF
We also have OSPF running between R1 and R3
R4 and R5 peer via BGP VPNV4
Now there is a 3rd site i didnt add in but its just a site in the same VRF
running RIP as the routing protocol. Those routes from Site 3 get into the
routing tables on R1 and R3 as external routes obviously
Now what would be the best way to tell R1 that to get to Site3 it must route
through R3 then R5 then to Site3
Can i use OSPF distance on R5 or rather change the OSPF cost on the
interface on R3 that peers OSPF with R1 ?
Thanks
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:28 ARST