From: Vaibhav Sharma (mailvabs@gmail.com)
Date: Wed Oct 15 2008 - 03:16:43 ART
Hemant,
On Cisco 3745, VIC-4FXS/DID is not supported on an NM-HDV (but is supported
on NM-HDV2 and requires atleast Cisco IOS 12.3(14)T or a later veresion )
Reference:
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml
HTH,
Vaibhav
On Wed, Oct 15, 2008 at 10:25 AM, Hemant Sharma <dcehemant@gmail.com> wrote:
> Dear All,
>
> can any one help me in this . i have to enable voice services on cisco 3745
> so i use NM-HDV1 for VIC-4FXS-DID voice card. I inserted voice
> (VIC-4FXS-DID) card in NM-HDV1 but it showing following error ,( This is
> the
> output of Show diag command.)
> Slot 4:
>        Unknown (type 922) Port adapter
>        Port adapter is disabled deactivated
>        Port adapter insertion time unknown
>         EEPROM contents at hardware discovery:
>         Hardware Revision        : 5.3
>         Top Assy. Part Number    : 800-21590-02
>        Board Revision           : B0
>        Deviation Number         : 0-0
>         Fab Version              : 03
>        PCB Serial Number        : FOC11455E1U
>         RMA Test History         : 00
>        RMA Number               : 0-0-0-0
>         RMA History              : 00
>         Product (FRU) Number     : NM-HD-1V
>         Version Identifier (VID) : V01
>         EEPROM format version 4
>         EEPROM contents (hex):
>           0x00: 04 FF 40 03 9A 41 05 03 C0 46 03 20 00 54 56 02
>           0x10: 42 42 30 80 00 00 00 00 02 03 C1 8B 46 4F 43 31
>           0x20: 31 34 35 35 45 31 55 03 00 81 00 00 00 00 04 00
>           0x30: CB 88 4E 4D 2D 48 44 2D 31 56 89 56 30 31 20 FF
>           0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>           0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>           0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>           0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>
> I searched on cisco on found that NM_HDV1 supports VIC-4FXS-DID voice card
> and all the compatible hardware are in built in NM-HDV1. I reinserted the
> card but still voice card is not detecting.
>
> Please help.
>
> Regards
> Hemant
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:21 ARST