From: Hemant Sharma (dcehemant@gmail.com)
Date: Wed Oct 15 2008 - 01:55:03 ART
Dear All,
can any one help me in this . i have to enable voice services on cisco 3745
so i use NM-HDV1 for VIC-4FXS-DID voice card. I inserted voice
(VIC-4FXS-DID) card in NM-HDV1 but it showing following error ,( This is the
output of Show diag command.)
Slot 4:
Unknown (type 922) Port adapter
Port adapter is disabled deactivated
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 5.3
Top Assy. Part Number : 800-21590-02
Board Revision : B0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : FOC11455E1U
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : NM-HD-1V
Version Identifier (VID) : V01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 9A 41 05 03 C0 46 03 20 00 54 56 02
0x10: 42 42 30 80 00 00 00 00 02 03 C1 8B 46 4F 43 31
0x20: 31 34 35 35 45 31 55 03 00 81 00 00 00 00 04 00
0x30: CB 88 4E 4D 2D 48 44 2D 31 56 89 56 30 31 20 FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
I searched on cisco on found that NM_HDV1 supports VIC-4FXS-DID voice card
and all the compatible hardware are in built in NM-HDV1. I reinserted the
card but still voice card is not detecting.
Please help.
Regards
Hemant
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:21 ARST