From: Piotr (usaccie@gmail.com)
Date: Tue Oct 07 2008 - 10:40:04 ART
What I do before I even start is create a vlan diagram and task tracker.
On Mon, Oct 6, 2008 at 7:36 PM, Andrew Dempsey <apdccie@gmail.com> wrote:
> I am sure you already doing this, but I need to say it for my own benifit
> if
> nothing else.
>
> (1) Configure Trunk Ports
> verify
> (2) Configure VTP Configuration
> verify
> (3) Add & Assign VLAN
> verify
> (4) Assign IP to interfaces
> verify
> (5) Configure Frame-relay
> verify
> (6 ) IP IGP Protocol ........etc...etc
> verify
>
> On Mon, Oct 6, 2008 at 4:33 PM, nouman abbasi <abbasi.nouman@gmail.com
> >wrote:
>
> > Hi GS,
> > I have not attended any BootCamp so It would sound a silly Question but
> > your
> > experience input will help me.
> >
> > Is this Approach OK for Lab Exams
> >
> > I follow simple rules during Lab Practise
> >
> > (1) Configure Trunk Ports
> > (2) Configure VTP Configuration
> > (3) Add & Assign VLAN
> > (4) Assign IP to interfaces
> > (5) Configure Frame-relay
> > (6 ) IP IGP Protocol ........etc...etc
> >
> >
> > I am referring to Khawar / Narbik WorkBook
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST