From: kang lee (kanghlee@gmail.com)
Date: Mon Oct 06 2008 - 13:38:43 ART
Thank you for all of your reply.
There were no requirements. I was just curious. If I can't ping it, i think
it is ok. I was just wondering that I did not find some special tips or
tricks.
I am not using frame-relay map.
My configuration is like this.
R3#
conf t
int s0/0
no ip add
enc frame-re
no frame-re inver
int s0/0.35 point-to-p
frame-rel inter 305 ppp virtual-tem 1
int virtual-tem 1
ip add 18.18.35.3 255.255.255.0
same way as R5.
On Mon, Oct 6, 2008 at 8:54 AM, Gary Duncanson <garyduncanson@btinternet.com
> wrote:
> Lloyd
>
> I forgot the details but I think your right. I recall loopback is involved
> somewhere.
>
> Gary
> ----- Original Message -----
> From: Lloyd Ardoin
> To: Gary Duncanson ; kang lee
> Cc: Cisco certification
> Sent: Monday, October 06, 2008 2:24 PM
> Subject: RE: virtual-template ping
>
>
> Not sure if the only way to do that would be to add a lookback and then
> use
> ip unnumbered under the virtual template interface.
>
> Lloyd V Ardoin
>
>
>
>
> -----------------------------------------------------------------------------
> -
> From: Gary Duncanson
> Sent: Mon 10/6/2008 7:47 AM
> To: kang lee
> Cc: Cisco certification
> Subject: Re: virtual-template ping
>
>
> Kang
>
> Frame Relay map to itself may help. Failing that its the loopback issue.
> Check archives.
>
> Regards
> Gary
> ----- Original Message -----
> From: "kang lee" <kanghlee@gmail.com>
> To: "Cisco certification" <ccielab@groupstudy.com>
> Sent: Monday, October 06, 2008 5:31 AM
> Subject: virtual-template ping
>
>
> > GS,
> > I am wondering if I can ping the virtual-template interface. R3<=>R5
> >
> > I can ping other interface fine but not the interface on the router.
> > from R3
> > ping 18.18.35.2
> > success!!!!!
> >
> > from R5
> > ping 18.18.35.1
> > success!!!!
> >
> > from R3
> > ping 18.18.35.1
> > no success
> >
> > from R5
> > ping 18.18.35.2
> > no success
> >
> >
> >
> > R3#
> > int virtual-template 1
> > ip add 18.18.35.1 255.255.255.0
> >
> >
> > R5#
> > int virtual-tempate 1
> > ip add 18.18.35.2 255.255.255.0
> >
> >
> > other configuration omitted!
> >
> >
> >
> > is there any way i can configure to ping it?
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST