From: Pavel Bykov (slidersv@gmail.com)
Date: Thu Sep 11 2008 - 20:14:39 ART
Hello.
1. The second number is percentage value of when the warning should be
issued. 100 is not a default value, 85 is (if my memory serves correctly)
and therefore they are different.
2. Looks like it's a matter of question interpretation.
On Wed, Sep 10, 2008 at 11:46 PM, Chidd <dungchid@gmail.com> wrote:
> Dear all !
>
> I am quite confuse when using some commands:
>
> 1. Maximum-prefix: (Lab Assessor)
> - "neighbour 1.1.1.1 maximum-prefix 50 100 warning-only" and "neighbor
> 1.1.1.1 maximum-prefix 50 warning-only"
> two above commands allow 50 prefixes are received but number of prefixes
> reach to threshold (50)-> have warning. So, what is the different ??
> 2. Metric:
> The question asked for default metric (fixed metric) of EIGRP routes
> redistributed into OSPF is 5000. (Cisco practical lab (version 2008))
> My solution: "redistribute eigrp 1 subnet metric 5000"
> but in the solution guide, they use
> "redistribute eigrp 1 subnet
> default-metric 5000"
> It's make me confuse, because Question require that only EIGRP
> redistributed
> into OSPF with metric 5000. If they use command "default-metric 5000" which
> mean that every routes are redistributed into OSPF will have metric 5000.
>
> Please correct me what I wrong !
>
> Thanks.
>
> Chidd
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Pavel Bykov ------------------------------------------------- Stop the braindumps! http://www.stopbraindumps.com/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART