From: Chidd (dungchid@gmail.com)
Date: Wed Sep 10 2008 - 18:46:02 ART
Dear all !
I am quite confuse when using some commands:
1. Maximum-prefix: (Lab Assessor)
- "neighbour 1.1.1.1 maximum-prefix 50 100 warning-only" and "neighbor
1.1.1.1 maximum-prefix 50 warning-only"
two above commands allow 50 prefixes are received but number of prefixes
reach to threshold (50)-> have warning. So, what is the different ??
2. Metric:
The question asked for default metric (fixed metric) of EIGRP routes
redistributed into OSPF is 5000. (Cisco practical lab (version 2008))
My solution: "redistribute eigrp 1 subnet metric 5000"
but in the solution guide, they use
"redistribute eigrp 1 subnet
default-metric 5000"
It's make me confuse, because Question require that only EIGRP redistributed
into OSPF with metric 5000. If they use command "default-metric 5000" which
mean that every routes are redistributed into OSPF will have metric 5000.
Please correct me what I wrong !
Thanks.
Chidd
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART