From: jenifer Dcosta (jeniferdcosta@gmail.com)
Date: Sun Aug 31 2008 - 10:49:56 ART
Hi Experts,
c3500XL-c3h2s-mz-120.5.2-XU.bin--the ios image and it is a C3500XL-48 port
switch .The Gbic module what i have connected is from from cisco not any
third party.The link was working before but automatically i when to c it is
orange i swap the Gbic and also the cables but the protocol is down and the
light is orange.Is it Hardware failure on the Gbic ports inside the switch?.
Also it is not giving me any errors @ startup.
Sorry guys to reply late.
Thanks,
Jenifer
On Sat, Aug 30, 2008 at 9:54 PM, <david@gotimmons.com> wrote:
> You might also check to see if the interface is in err-disabled status
> Sent from my BlackBerry(R) wireless device
>
> -----Original Message-----
> From: "Tony Schaffran \(GS\)" <groupstudy@cconlinelabs.com>
>
> Date: Sat, 30 Aug 2008 09:52:30
> To: 'jenifer Dcosta'<jeniferdcosta@gmail.com>; 'Cisco certification'<
> ccielab@groupstudy.com>
> Subject: RE: can anybody help
>
>
> What is the model of switch and IOS version?
>
> Has this GBIC link worked before or is this a new connection?
>
> Have you tried to swap the fiber connections on one end?
>
>
> Tony Schaffran
> Sr. Network Consultant
> CCIE #11071
> CCNP, CCNA, CCDA,
> NNCDS, NNCSS, CNE, MCSE
>
> www.cconlinelabs.com
> Your #1 choice for online Cisco rack rentals.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> jenifer Dcosta
> Sent: Saturday, August 30, 2008 7:44 AM
> To: Cisco certification
> Subject: can anybody help
>
> Hi Experts,
>
> I m facing 1 issue with 1 of my access switches,my switch uplink ports are
> gibic modules and i m not able to connect
>
> to the core.i have changed the gbic modules but still it does'nt work and
> also the fibre cable too.One of the strange thing is that when i remove
>
> gbic module still the led glows orange and when i insert it again still it
> remains same .Interface is up but the line protocol is down always.
>
> Have any body face this issue before i have done the default interface also
> but still it doesnt come up.I dont understand when there is no gbic moduls
> inserted still the light glows orange
>
> And when i m inserting in the next Gbic port the light doesnt even glows
> nor
> orange nor green.it seems like the module is not inserted.Trunk
> configurations are correct and also negotiations are also correct
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:33 ART