From: john matijevic (john.matijevic@gmail.com)
Date: Sun Aug 31 2008 - 15:53:47 ART
Hello Jennifer,
Please post the config on both sides.
Sincerely,
John
On 8/31/08, jenifer Dcosta <jeniferdcosta@gmail.com> wrote:
> Hi Experts,
>
>
> c3500XL-c3h2s-mz-120.5.2-XU.bin--the ios image and it is a C3500XL-48 port
> switch .The Gbic module what i have connected is from from cisco not any
> third party.The link was working before but automatically i when to c it is
> orange i swap the Gbic and also the cables but the protocol is down and the
> light is orange.Is it Hardware failure on the Gbic ports inside the switch?.
>
> Also it is not giving me any errors @ startup.
>
> Sorry guys to reply late.
>
> Thanks,
> Jenifer
>
>
>
> On Sat, Aug 30, 2008 at 9:54 PM, <david@gotimmons.com> wrote:
>
>> You might also check to see if the interface is in err-disabled status
>> Sent from my BlackBerry(R) wireless device
>>
>> -----Original Message-----
>> From: "Tony Schaffran \(GS\)" <groupstudy@cconlinelabs.com>
>>
>> Date: Sat, 30 Aug 2008 09:52:30
>> To: 'jenifer Dcosta'<jeniferdcosta@gmail.com>; 'Cisco certification'<
>> ccielab@groupstudy.com>
>> Subject: RE: can anybody help
>>
>>
>> What is the model of switch and IOS version?
>>
>> Has this GBIC link worked before or is this a new connection?
>>
>> Have you tried to swap the fiber connections on one end?
>>
>>
>> Tony Schaffran
>> Sr. Network Consultant
>> CCIE #11071
>> CCNP, CCNA, CCDA,
>> NNCDS, NNCSS, CNE, MCSE
>>
>> www.cconlinelabs.com
>> Your #1 choice for online Cisco rack rentals.
>>
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>> jenifer Dcosta
>> Sent: Saturday, August 30, 2008 7:44 AM
>> To: Cisco certification
>> Subject: can anybody help
>>
>> Hi Experts,
>>
>> I m facing 1 issue with 1 of my access switches,my switch uplink ports are
>> gibic modules and i m not able to connect
>>
>> to the core.i have changed the gbic modules but still it does'nt work and
>> also the fibre cable too.One of the strange thing is that when i remove
>>
>> gbic module still the led glows orange and when i insert it again still it
>> remains same .Interface is up but the line protocol is down always.
>>
>> Have any body face this issue before i have done the default interface
>> also
>> but still it doesnt come up.I dont understand when there is no gbic moduls
>> inserted still the light glows orange
>>
>> And when i m inserting in the next Gbic port the light doesnt even glows
>> nor
>> orange nor green.it seems like the module is not inserted.Trunk
>> configurations are correct and also negotiations are also correct
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:33 ART