From: Shahid Ansari (shahid1357@gmail.com)
Date: Fri Aug 22 2008 - 12:57:38 ART
dir
boot bootdisk:<filename>
shahid
On Fri, Aug 22, 2008 at 6:50 PM, L Pham <ccie17030@gmail.com> wrote:
> For DYI !!!
>
> http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa1.shtml
>
>
> On Fri, Aug 22, 2008 at 8:21 AM, L Pham <ccie17030@gmail.com> wrote:
> > Man: this is a 10G baby: I have not get my hand on it yet !
> > Anyhow, I done it hundred times ....
> > Let see your log from the power on sequence all the way to you manually
> type
> > boot bootdisk:<filename>
> >
> > Loc
> >
> >
> > On Fri, Aug 22, 2008 at 7:49 AM, KS Anpu <ksanpu@gmail.com> wrote:
> >> Yes , may be but the thing is the ios is nearly 90 MB so it will take a
> big
> >> time if i start through xmodem. Actually IOS is there , if i put dir
> >> bootdisk: , i can see the ios , but if i try to boot using this only it
> is
> >> giving the magic number error.
> >>
> >> is there any document available it documentation center for customize
> the
> >> boot variables from Rommon.? if so Can anyone help me to find that.
> >>
> >> Regards,
> >> Anbu
> >>
> >> On Fri, Aug 22, 2008 at 6:26 PM, Dan C <cdan2154@gmail.com> wrote:
> >>
> >>> Hi Anbu,
> >>>
> >>> If you get across bad file magic number it meas that the ios file is
> >>> corrupted and you will need to xmodem a fresh image from rommon....
> >>>
> >>> Cheers,
> >>> Dan
> >>>
> >>> On Fri, Aug 22, 2008 at 5:21 PM, KS Anpu <ksanpu@gmail.com> wrote:
> >>>
> >>>> Hi anyone can help me to edit the magic number from Rommon in
> VS-S720-10G.
> >>>> The issue is when the switch is booting it is going to Rommon and
> cannot
> >>>> boot from there. i am getting the error message as
> >>>> rommon 1 > boot
> >>>>
> >>>> Initializing ATA monitor library...
> >>>> string is bootdisk:s72033-ipbasek9-vz.122-33.SXH2a.bin
> >>>> Loading image, please wait ...
> >>>>
> >>>>
> >>>> Initializing ATA monitor library...
> >>>> loadprog: bad file magic number: 0x0
> >>>> boot: cannot load "bootdisk:"
> >>>>
> >>>> But the ios is in bootdisk: , So is there any way to change the magic
> >>>> number
> >>>> or get the default configuration.
> >>>>
> >>>> Regards,
> >>>> Anbu
> >>>>
> >>>>
> >>>> Blogs and organic groups at http://www.ccie.net
> >>>>
> >>>>
> _______________________________________________________________________
> >>>> Subscription information may be found at:
> >>>> http://www.groupstudy.com/list/CCIELab.html
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART