From: KS Anpu (ksanpu@gmail.com)
Date: Fri Aug 22 2008 - 13:14:01 ART
Hi All
This is the situation , ios is there in the bootdisk: but cannot
boot it is saying the bad file or magic number. I have been tring to find
the way to change / go back to default setting of Rommon. it may be through
upload the ios again through xmodem.i am looking ...if there are any other
way.
* rommon 1 > boot bootdisk:s72033-ipbasek9-vz.122-33.SXH2a.bin*
Initializing ATA monitor library...
string is bootdisk:s72033-ipbasek9-vz.122-33.SXH2a.bin
Loading image, please wait ...
Initializing ATA monitor library...
loadprog: bad file magic number: 0x0
boot: cannot load "bootdisk:"
*rommon 2 > dir bootdisk:*
Initializing ATA monitor library...
Directory of bootdisk:
7530 7601 -rw- s72033-ipbasek9-vz.122-33.SXH2a.bin
5482 33554432 -rw- sea_log.dat
7531 7601 -rw- no
Regards,
Anbu
On Fri, Aug 22, 2008 at 8:51 PM, L Pham <ccie17030@gmail.com> wrote:
> Man: this is a 10G baby: I have not get my hand on it yet !
> Anyhow, I done it hundred times ....
> Let see your log from the power on sequence all the way to you manually
> type
> boot bootdisk:<filename>
>
> Loc
>
>
> On Fri, Aug 22, 2008 at 7:49 AM, KS Anpu <ksanpu@gmail.com> wrote:
> > Yes , may be but the thing is the ios is nearly 90 MB so it will take a
> big
> > time if i start through xmodem. Actually IOS is there , if i put dir
> > bootdisk: , i can see the ios , but if i try to boot using this only it
> is
> > giving the magic number error.
> >
> > is there any document available it documentation center for customize the
> > boot variables from Rommon.? if so Can anyone help me to find that.
> >
> > Regards,
> > Anbu
> >
> > On Fri, Aug 22, 2008 at 6:26 PM, Dan C <cdan2154@gmail.com> wrote:
> >
> >> Hi Anbu,
> >>
> >> If you get across bad file magic number it meas that the ios file is
> >> corrupted and you will need to xmodem a fresh image from rommon....
> >>
> >> Cheers,
> >> Dan
> >>
> >> On Fri, Aug 22, 2008 at 5:21 PM, KS Anpu <ksanpu@gmail.com> wrote:
> >>
> >>> Hi anyone can help me to edit the magic number from Rommon in
> VS-S720-10G.
> >>> The issue is when the switch is booting it is going to Rommon and
> cannot
> >>> boot from there. i am getting the error message as
> >>> rommon 1 > boot
> >>>
> >>> Initializing ATA monitor library...
> >>> string is bootdisk:s72033-ipbasek9-vz.122-33.SXH2a.bin
> >>> Loading image, please wait ...
> >>>
> >>>
> >>> Initializing ATA monitor library...
> >>> loadprog: bad file magic number: 0x0
> >>> boot: cannot load "bootdisk:"
> >>>
> >>> But the ios is in bootdisk: , So is there any way to change the magic
> >>> number
> >>> or get the default configuration.
> >>>
> >>> Regards,
> >>> Anbu
> >>>
> >>>
> >>> Blogs and organic groups at http://www.ccie.net
> >>>
> >>> _______________________________________________________________________
> >>> Subscription information may be found at:
> >>> http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART