From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Sat Aug 16 2008 - 07:52:38 ART
You are correct ..
Thats why i said that " frame-rel map " will be of no use .
Gaurav Madan
On Sat, Aug 16, 2008 at 4:19 PM, Fahad Khan <fahad.khan@gmail.com> wrote:
> If I am not wrong you are running "frame map" command on that interface
> (physical) on which this IP "167.1.135.1" does not exit.That must be the IP
> of virtual-template interface.so how can your mapping work?
>
>
> On 8/16/08, GAURAV MADAN <gauravmadan1177@gmail.com> wrote:
>>
>> HI Group
>>
>> In case i have a 3 rtr setup ( hub and spoke ) running PPPoFr .. What
>> config do i need to get self ping working ?
>> (frame-rel map ip <self> <dlci> ) wont work here ..
>>
>> Any suggestions
>>
>> Thnx
>> Gaurav Madan
>>
>> ========== CONFIG ==============
>>
>> Rack1R1(config-if)#do sh ip int br | inc Virt
>> Virtual-Access1 167.1.135.1 YES TFTP up
>> up
>> Virtual-Template1 167.1.135.1 YES manual down
>> down
>> Virtual-Access2 unassigned YES unset down
>> down
>>
>> Rack1R1(config-if)#do p 167.1.135.1
>>
>> Type escape sequence to abort.
>> Sending 5, 100-byte ICMP Echos to 167.1.135.1, timeout is 2 seconds:
>> .....
>> Success rate is 0 percent (0/5)
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>
>
>
> --
> FAHAD KHAN
>
> BE Computer Systems NED,
>
> CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE (Written)
>
> Systems Support Engineer, Premier Systems (Pvt) limited,
>
> Karachi, Pakistan
>
> 92-321-2370510.
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART