Re: Self ping in PPPoFR

From: Fahad Khan (fahad.khan@gmail.com)
Date: Sat Aug 16 2008 - 07:49:39 ART

If I am not wrong you are running "frame map" command on that interface
(physical) on which this IP "167.1.135.1" does not exit.That must be the IP
of virtual-template interface.so how can your mapping work?

On 8/16/08, GAURAV MADAN <gauravmadan1177@gmail.com> wrote:
>
> HI Group
>
> In case i have a 3 rtr setup ( hub and spoke ) running PPPoFr .. What
> config do i need to get self ping working ?
> (frame-rel map ip <self> <dlci> ) wont work here ..
>
> Any suggestions
>
> Thnx
> Gaurav Madan
>
> ========== CONFIG ==============
>
> Rack1R1(config-if)#do sh ip int br | inc Virt
> Virtual-Access1 167.1.135.1 YES TFTP up
> up
> Virtual-Template1 167.1.135.1 YES manual down
> down
> Virtual-Access2 unassigned YES unset down
> down
>
> Rack1R1(config-if)#do p 167.1.135.1
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 167.1.135.1, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
*FAHAD KHAN

BE Computer Systems NED,

CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE  (Written)

Systems Support Engineer, Premier Systems (Pvt) limited,

Karachi, Pakistan

92-321-2370510.*

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART