From: GARY DUNCANSON (garyduncanson@btinternet.com)
Date: Sat Aug 16 2008 - 09:45:59 ART
This one has been covered before. Check the archives. I believe someone
suggested using a loopback somewhere if you *really* need self ping when a
virtual template is involved.
Rgds
Gary
----- Original Message -----
From: "GAURAV MADAN" <gauravmadan1177@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Saturday, August 16, 2008 10:29 AM
Subject: Self ping in PPPoFR
> HI Group
>
> In case i have a 3 rtr setup ( hub and spoke ) running PPPoFr .. What
> config do i need to get self ping working ?
> (frame-rel map ip <self> <dlci> ) wont work here ..
>
> Any suggestions
>
> Thnx
> Gaurav Madan
>
> ========== CONFIG ==============
>
> Rack1R1(config-if)#do sh ip int br | inc Virt
> Virtual-Access1 167.1.135.1 YES TFTP up
> up
> Virtual-Template1 167.1.135.1 YES manual down
> down
> Virtual-Access2 unassigned YES unset down
> down
>
> Rack1R1(config-if)#do p 167.1.135.1
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 167.1.135.1, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART