From: Joseph Saad (joseph.samir.saad@gmail.com)
Date: Tue Aug 12 2008 - 16:08:38 ART
Nope, it doesn't.
http://www.cisco.com/en/US/docs/ios/12_0/np1/command/reference/1reigrp.html#wp1017590
An extract from this URL
*Note *You cannot set the administrative distance in EIGRP against certain
routes or sources, as you can with other protocols. The command does not
work this way with EIGRP.
On Tue, Aug 12, 2008 at 9:30 PM, Usama Pervaiz <chaudri@gmail.com> wrote:
> Hello all!
>
> I wanted to ask if the distance command under the eigrp process works
> like it does for rip.
>
> example:
> I am receiving routes from router with IP 10.10.2.2 (eigrp router-id
> 2.2.2.2) and I want to change the admin distance of routes: 12.12.1.1
> 12.12.2.2 and 12.12.3.3
>
> eigrp 5
> distance 91 10.10.2.2 0.0.0.0 1
> !
> access-list 1 permit 12.12.1.0 0.0.0.255
> access-list 1 permit 12.12.2.0 0.0.0.255
> access-list 1 permit 12.12.3.0 0.0.0.255
>
> will the above config change the admin distance for the respective
> routes? Do i have to use the router-id instead of the router ip
> address? I have tried the above but the distance does not change. I
> also tried it with
>
> distance 91 0.0.0.0 255.255.255.255 1
>
> but still nothing.
>
> Any thoughts? anyone...anyone....Bueller.....
>
> Thanks.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:30 ART