Re: eigrp distance command

From: Fahad Khan (fahad.khan@gmail.com)
Date: Tue Aug 12 2008 - 17:11:54 ART

Dear Usama,

This is possible exactly in the same manner as we configure in RIP. Which
IOS are u using?

regards,

On 8/12/08, Usama Pervaiz <chaudri@gmail.com> wrote:
>
> Hello all
>
> I wanted to ask if the distance command under the eigrp process works
> like it does for rip.
>
> example:
> I am receiving routes from router with IP 10.10.2.2 (eigrp router-id
> 2.2.2.2) and I want to change the admin distance of routes: 12.12.1.1
> 12.12.2.2 and 12.12.3.3
>
> eigrp 5
> distance 91 10.10.2.2 0.0.0.0 1
> !
> access-list 1 permit 12.12.1.0 0.0.0.255
> access-list 1 permit 12.12.2.0 0.0.0.255
> access-list 1 permit 12.12.3.0 0.0.0.255
>
> will the above config change the admin distance for the respective
> routes? Do i have to use the router-id instead of the router ip
> address? I have tried the above but the distance does not change. I
> also tried it with
>
> distance 91 0.0.0.0 255.255.255.255 1
>
> but still nothing.
>
> Any thoughts? anyone...anyone....Bueller.....
>
> Thanks.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
*FAHAD KHAN

BE Computer Systems NED,

CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE  (Written)

Systems Support Engineer, Premier Systems (Pvt) limited,

Karachi, Pakistan

92-321-2370510.*

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:30 ART