Re: frame-relay encapsulation type

From: Fahad Khan (fahad.khan@gmail.com)
Date: Fri Jul 25 2008 - 16:21:43 ART

no,since this encapsulation type only matters with the communation of router
with FR switch. That encapsulation must be supported on FR-switch.

Thanks and regards,

On 7/26/08, Dailong Li <david.lonnie@gmail.com> wrote:
>
> Hi,experts:
> I have a question about frame-relay encapsulation type.
>
>
> R1 is hub,R2,R3 are spoke.
>
> R1:
> int s0/0
> en frame ietf
> ip add 11.11.123.1 255.255.255.0
> frame map ip 11.11.123.2 102 b
> frame map ip 11.11.123.3 103 b
>
> R2:
> int s0/0
> en fram
> ip add 11.11.123.2 255.255.255.0
> fram map ip 11.11.123.1 201 b
> fram map ip 11.11.123.3 201 b
>
> R3:
> int s0/0
> en fram
> ip add 11.11.123.3 255.255.255.0
> fram map ip 11.11.123.1 301 b
> fram map ip 11.11.123.2 301 b
>
>
> R1 encapsulation is ietf. and i did not add ietf keyword on R2 and R3.
> i can still ping each other.
>
> My question is ,if there is any issues when encapsulation types are
> different between devices?
>
>
>
> Thanks in advance.
>
>
> David
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
> 

-- 
*FAHAD KHAN

BE Computer Systems NED,

CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE  (Written)

Systems Support Engineer, Premier Systems (Pvt) limited,

Karachi, Pakistan

92-321-2370510.*

This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:57 ART