RE: VTP Pruning

From: Edison Ortiz (edisonmortiz@gmail.com)
Date: Sun Jul 13 2008 - 13:09:59 ART

• Next message: Hobbs: "Can't get route-map continue clause to work"
• Previous message: akyccie: "Re: VTP"
• Maybe in reply to: akyccie: "VTP Pruning"
• Next in thread: Fahad Khan: "Re: VTP Pruning"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

'show interface trunk'

Edison Ortiz
Routing and Switching, CCIE # 17943
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
akyccie
Sent: Sunday, July 13, 2008 6:59 AM
To: ccielab@groupstudy.com
Subject: VTP Pruning

How to verify VTP pruning is working as expected. "shpw VTP status" command
only show whether it's enable of not. How to verify the desired result
configuring VTP Pruning. Thanks

Switch> show vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 45
VTP Operating Mode : Server
VTP Domain Name : ccie
VTP Pruning Mode : Enabled
VTP V2 Mode : Disabled
VTP Traps Generation : Enabled
MD5 digest : 0x3A 0x29 0x86 0x39 0xB4 0x5D 0x58 0xD7

• Next message: Hobbs: "Can't get route-map continue clause to work"
• Previous message: akyccie: "Re: VTP"
• Maybe in reply to: akyccie: "VTP Pruning"
• Next in thread: Fahad Khan: "Re: VTP Pruning"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:54 ART